Electricity
Charge, current and potential difference
Electric current is the rate of flow of charge, , measured with an ammeter in series. Potential difference (and e.m.f.) is the energy transferred per unit charge, , measured with a voltmeter in parallel. Rubbing insulators transfers electrons, giving them static charge; like charges repel and unlike charges attract.
≈ 30 minResistance
Resistance tells you how hard it is for current to flow: , in ohms (Ω). A fixed resistor at constant temperature has a straight-line – graph; a filament lamp curves because its resistance rises as it heats; a diode lets current through in one direction only. Longer, thinner wires have more resistance.
≈ 30 minSeries and parallel circuits
In series, the current is the same everywhere, p.d.s add up to the supply, and resistances add. In parallel, each branch gets the full p.d., the branch currents add up to the total, and the combined resistance is less than any single branch. A potential divider shares the supply p.d. in the ratio of its resistances.
≈ 35 minElectrical power, energy and safety
Electrical power is , and the energy transferred is . Electricity companies charge per kilowatt-hour: the energy used by a kW appliance in hour. Fuses and circuit breakers cut off the current if it gets too big; earthing a metal case makes a fault blow the fuse instead of electrocuting you.
≈ 30 minTransformers
A transformer has two coils wound on a soft iron core. An alternating current in the primary coil makes a changing magnetic field that induces an alternating e.m.f. in the secondary. The voltages are in the same ratio as the turns: . Power stations step the voltage up for transmission so the current, and the energy wasted heating the cables, is small.
≈ 30 min
What the AQA 8463 syllabus asks for in electricity
- 4.2.1.1 Circuit diagram symbols
- 4.2.1.2 Charge and current
- 4.2.1.3 Current, resistance and pd (RP3)
- 4.2.1.4 Ohmic and non-ohmic components (RP4)
- 4.2.2 Series and parallel circuits
- 4.2.3.1 Direct and alternating pd
- 4.2.3.2 Mains electricity and safety
- 4.2.4.1 Power in circuits
- 4.2.4.2 Energy transfers in appliances
- 4.2.4.3 The National Grid
- 4.2.5.1 Static charge
- 4.2.5.2 Electric fields
- 4.7.3.4 Transformers
Summarised in our own words from the official First teaching 2016 syllabus; each point is taught in the lessons above.