Salam Academy
Electricity · Subtopic 1 of 5

Charge, Current and Potential Difference

Electric current is the rate of flow of charge, I=QtI=\dfrac Qt, measured with an ammeter in series. Potential difference (and e.m.f.) is the energy transferred per unit charge, V=WQV=\dfrac WQ, measured with a voltmeter in parallel. Rubbing insulators transfers electrons, giving them static charge; like charges repel and unlike charges attract.

8463 past papers

Cambridge 5054 Paper 1Cambridge 5054 Paper 2Cambridge 0625 Papers 2, 4Cambridge 0625 Papers 1, 3Edexcel 4PH1 Paper 1PEdexcel 4PH1 Paper 2P≈ 30 minRevision 10 · updated
On the AQA 8463 syllabus (First teaching 2016): 3 points this lesson covers
  • 4.2.1.2 Charge and current
  • 4.2.5.1 Static charge
  • 4.2.5.2 Electric fields

Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.

Section 1 of 14

Learning objectives

  • Explain charging by friction and the forces between charges.
  • Distinguish conductors and insulators.
  • Use I=QtI=\dfrac Qt and connect ammeters correctly.
  • Use V=WQV=\dfrac WQ for e.m.f. and p.d., and connect voltmeters correctly.
Pause and think

You rub a balloon on your hair and it sticks to the wall. Nothing was added to the balloon except rubbing. Where did its charge come from?

Section 2 of 14

Core idea

Start hereA balloon on the wall

Rub a balloon on your hair and it sticks to the wall. Electrons have moved from your hair to the balloon. Charge moving like this, and charge flowing steadily through wires, are the same stuff behaving differently.

The big idea

Electrons (−) move; protons (+) stay. Current I=QtI=\frac Qt; potential difference V=WQV=\frac WQ (energy per coulomb).

1. Static electricity

Charging by friction: electrons move from cloth to rod
−−−−−−+++++polythene rod: gains electrons (−)cloth: loses electrons (+)
Only electrons move. The rod and cloth end up with equal and opposite charges.
  • Like charges repel; unlike attract.
  • Gaining electrons makes an object negative.
  • Electric field: region where a charge feels a force.

2. Current and voltage

A simple circuit with an ammeter and a voltmeter
AVcellresistorammeter in seriesvoltmeter in parallel
The ammeter is part of the loop (the current flows through it). The voltmeter is connected across the component to compare energy either side.
Q=ItW=QVQ=It\qquad W=QV
where
QQ
charge (C).
II
current (A).
VV
p.d. (V = J/C).
WW
energy transferred (J).
Worked example2 A for 30 s at 12 V

Charge and energy.

Goal
QQ, WW.
Strategy
Two formulas.
  1. Q=2×30=60 CQ=2\times30=60\text{ C}
    Charge.
  2. W=60×12=720 JW=60\times12=720\text{ J}
    Each coulomb carries 12 J.
Answer6060 C; 720720 J.
✓ CheckP=VI=24P=VI=24 W × 30 s = 720 J ✓.
  • Ammeter in series; voltmeter in parallel.
  • Conventional current + to −; electrons − to +.
Common misconceptionPositive charge moving In solids only electrons move; a positive object has lost electrons.
Pause and think

A cloth gains electrons when rubbing a rod. Rod's charge?

Electrical quantities
QuantitySymbolUnitEquation
ChargeQcoulomb, CQ = It
CurrentIampere, AI=QtI=\frac Qt
Potential differenceVvolt, VV=WQV=\frac WQ
ResistanceRohm, ΩR=VIR=\frac VI
EnergyEjoule, JE = QV = IVt
Quick check

How much energy is transferred when 5 C of charge moves through a 12 V lamp?

Summary

  • I=Q/tI=Q/t; V=W/QV=W/Q.
  • Ammeter series, voltmeter parallel.
Key words
Coulomb
Unit of charge.
Potential difference
Energy per coulomb.

Also on your syllabus

  • Electron model of conductors. In a metal some electrons are not tied to any one atom: these free electrons can move through the whole metal, so it conducts. In an insulator such as plastic or rubber the electrons are all held tightly by their atoms, so charge cannot flow.
  • Current is a flow of charge. In a metal wire the moving charges are the free electrons. They drift from the negative terminal round to the positive terminal; conventional current is drawn the other way, positive to negative.
  • d.c. and a.c. Direct current (d.c.) flows in one direction only, as from a cell or battery. Alternating current (a.c.) keeps reversing direction, as from the mains (50 Hz in many countries).

Electric field patterns

  • The direction of an electric field line is the direction of the force on a small positive charge.
  • Round an isolated point charge or charged conducting sphere the lines are radial: pointing outwards from a positive charge and inwards towards a negative charge, getting further apart (weaker field) with distance.
  • Between two oppositely charged parallel plates the lines are straight, parallel and evenly spaced from the positive plate to the negative plate: the field is uniform, except near the edges.
  • Uses of static electricity: photocopiers and laser printers (charged drum attracts toner where the image is), inkjet printers (charged ink drops steered by charged plates), electrostatic paint spraying (charged paint drops spread out and are attracted to the earthed object), and smoke-stack precipitators.
  • e.m.f. (electromotive force) is the electrical work done by a source in moving a unit charge round a complete circuit, measured in volts.
HistoryFranklin's kite. In 17521752 Benjamin Franklin flew a kite in a thunderstorm to show lightning is electrical: charge travelled down the wet string to a key. He was lucky; others who repeated the experiment were killed. Franklin also chose the names "positive" and "negative".
Fun factElectrons are slow, signals are fast. In a typical wire, electrons drift at less than 11 mm per second, slower than a snail. A light comes on instantly because the whole wire is already full of electrons, and they all start moving at once.
Keep reading for free

Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.