Salam Academy
Electricity · Subtopic 4 of 5

Electrical Power, Energy and Safety

Electrical power is P=IVP=IV, and the energy transferred is E=IVtE=IVt. Electricity companies charge per kilowatt-hour: the energy used by a 11 kW appliance in 11 hour. Fuses and circuit breakers cut off the current if it gets too big; earthing a metal case makes a fault blow the fuse instead of electrocuting you.

8463 past papers

Cambridge 5054 Paper 1Cambridge 5054 Paper 2Cambridge 0625 Papers 2, 4Cambridge 0625 Papers 1, 3Edexcel 4PH1 Paper 1PEdexcel 4PH1 Paper 2P≈ 30 minRevision 9 · updated

Builds on: Series and parallel circuits

On the AQA 8463 syllabus (First teaching 2016): 4 points this lesson covers
  • 4.2.3.1 Direct and alternating pd
  • 4.2.3.2 Mains electricity and safety
  • 4.2.4.1 Power in circuits
  • 4.2.4.2 Energy transfers in appliances

Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.

Section 1 of 14

Learning objectives

  • Use P=IVP=IV and E=IVtE=IVt.
  • Calculate energy in kWh and its cost.
  • Choose a suitable fuse rating.
  • Explain fuses, circuit breakers, earthing and double insulation, and identify electrical hazards.
Pause and think

A washing machine has a metal case. Inside, a loose live wire touches the case. Why might nothing happen until someone touches the machine, and what stops that being deadly?

Section 2 of 14

Core idea

Start hereThe electricity bill

Your bill doesn't count joules; it counts kilowatt-hours. A 2 kW kettle running for an hour uses 2 kWh. Knowing power and time lets you predict cost, and knowing current lets you choose a fuse that keeps you safe.

The big idea

P=VI=I2RP=VI=I^2R; E=PtE=Pt; 1 kWh =3.6×106=3.6\times10^6 J. Fuse rating just above normal current; earthing protects against shocks.

1. Power and cost

P=VI,E=Pt,1 kWh=1000×3600 JP=VI,\qquad E=Pt,\qquad1\text{ kWh}=1000\times3600\text{ J}
where
PP
power (W).
EE
energy (J or kWh).
Worked exampleKettle

2 kW, 15 min a day, 20 cents per kWh.

Goal
Daily cost; energy in joules.
Strategy
kW × hours.
  1. 2×0.25=0.5 kWh2\times0.25=0.5\text{ kWh}
    15 min = 0.25 h.
  2. 0.5×20=10 cents0.5\times20=10\text{ cents}
    Cost.
  3. 2000×900=1.8×106 J2000\times900=1.8\times10^6\text{ J}
    In SI units.
Answer1010 cents a day; 1.81.8 MJ.
✓ Check0.5×3.6×106=1.8×1060.5\times3.6\times10^6=1.8\times10^6 ✓.

2. Safety

Inside a three-pin plug
earth (green/yellow)neutral (blue)live (brown)fuse on live
The fuse is in the live wire: if too much current flows, it melts and cuts off the supply. The earth wire carries current safely away if a metal case becomes live.
Worked exampleChoosing a fuse

2300 W appliance on 230 V. Fuses: 3, 5, 13 A.

Goal
Fuse.
Strategy
Normal current, then next size up.
  1. I=2300230=10 AI=\frac{2300}{230}=10\text{ A}
    I=P/VI=P/V.
  2. 13 A13\text{ A}
    Smallest rating above 10 A.
Answer1313 A.
✓ CheckA 5 A fuse would blow in normal use ✓.
  • Live (brown), neutral (blue), earth (green/yellow).
  • Fuse and switch in the live wire.
  • Earth carries fault current away, blowing the fuse.
  • Double insulation: no earth needed.
Pause and think

Why not use a 30 A fuse everywhere?

Electrical safety features
FeatureHow it protects
FuseMelts and breaks the circuit if the current is too large
Circuit breakerSwitches off automatically on overcurrent; can be reset
Earth wireCarries current safely to earth if a metal case becomes live, blowing the fuse
Double insulationPlastic case cannot become live, so no earth wire needed
Switch in the live wireAppliance is disconnected from the high voltage when off
Quick check

A 2.3 kW kettle runs on 230 V mains. Which fuse should it have: 3 A, 5 A or 13 A?

Summary

  • P=VIP=VI; E=PtE=Pt.
  • Fuse just above normal current.
Key words
Kilowatt-hour
Energy used by 1 kW for 1 hour.

Also on your syllabus

Key takeawayHazards to name Damaged insulation (bare live wire can be touched); overheating cables (current too high for the wire, a fire risk); damp conditions (water conducts, so current can pass through a person); excess current from overloading plugs, extension leads, single and multiple sockets.
  • Uses of electricity: heating, lighting, charging batteries, and powering motors and electronic systems.
  • If a live wire touches an earthed metal case, a large current flows straight to earth through the low-resistance earth wire. This melts the fuse (or trips the circuit breaker), cutting off the supply, so the case never stays live.
  • Fuses and circuit breakers go in the live wire, so that when they break the circuit the appliance is disconnected from the high voltage. In the neutral wire the appliance would stay live even after the fuse blew.
HistoryEdison's fuse. Thomas Edison patented an early fuse in 18901890: a thin wire that melted to protect his new electrical lighting systems from overheating. The basic idea is still used in plugs and cars today.
Fun factA lightning bolt for a day. A lightning bolt transfers around 11 billion joules, about 280280 kWh. That sounds huge, but at typical prices it's worth only about $50\$50 of electricity, and it's over in a fraction of a second.
Keep reading for free

Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.