Salam Academy
Forces · Subtopic 5 of 7

Turning Effect and Centre of Gravity

A force can turn an object about a pivot: its moment is force ×\times perpendicular distance from the pivot. When an object balances, the total clockwise moment equals the total anticlockwise moment. An object's weight acts at its centre of gravity; a low centre of gravity and wide base make it stable.

8463 past papers

Cambridge 5054 Paper 1Cambridge 5054 Paper 2Cambridge 0625 Papers 2, 4Cambridge 0625 Papers 1, 3Edexcel 4PH1 Paper 1PEdexcel 4PH1 Paper 2P≈ 30 minRevision 9 · updated

Builds on: Forces and motion

On the AQA 8463 syllabus (First teaching 2016): 1 point this lesson covers
  • 4.5.4 Moments, levers and gears

Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.

Section 1 of 14

Learning objectives

  • Calculate the moment of a force about a pivot.
  • Apply the principle of moments to balanced objects.
  • State the two conditions for equilibrium.
  • Find the centre of gravity of a lamina and explain stability.
Pause and think

Why is a door handle placed on the side furthest from the hinges?

Section 2 of 14

Core idea

Start hereBalancing a see-saw

A small child can balance a heavy adult on a see-saw by sitting further out. Turning effect depends on force and distance from the pivot.

The big idea

Moment =F×d=F\times d (perpendicular distance). Equilibrium: clockwise = anticlockwise moments and forces balance. Low centre of gravity and wide base: stable.

1. Principle of moments

A see-saw: moving the load changes its moment
−3−2−1123−11230position (m)300 N400 Nanticlockwise moment 300 × 2 = 600 N mclockwise moment 400 × d
It balances when 400d=600400d=600, so d=1.5d=1.5 m. The heavier person sits closer to the pivot.
∑clockwise moments=∑anticlockwise moments\sum\text{clockwise moments}=\sum\text{anticlockwise moments}
where
moment
force (N) × perpendicular distance from pivot (m), in N m.
Worked exampleSee-saw

400 N child 1.5 m left of the pivot; 300 N child on the right.

Goal
Distance for balance; pivot force.
Strategy
Moments; then vertical forces.
  1. 400×1.5=300×d400\times1.5=300\times d
    Anticlockwise = clockwise.
  2. d=2 md=2\text{ m}
    Solve.
  3. 400+300=700 N400+300=700\text{ N}
    Pivot pushes up to balance both weights.
Answer22 m; 700700 N upward.
✓ CheckLighter child sits further out ✓.
Worked exampleWeighing a metre rule

Balanced at 40 cm with 2 N at 10 cm. Rule's weight acts at 50 cm.

Goal
Weight WW.
Strategy
Moments about the pivot.
  1. 2×30=W×102\times30=W\times10
    Distances from 40 cm: 30 cm and 10 cm.
  2. W=6 NW=6\text{ N}
    Solve.
Answer66 N.
✓ CheckHeavier rule balances with a shorter arm ✓.

2. Stability

Stability: a low, wide base is harder to tip
GGstableeasily toppled
An object topples when its centre of gravity moves outside its base. Racing cars and buses keep their centres of gravity low.
When does it topple?
  1. CG above the base\text{CG above the base}
    Weight's moment about the tipping edge turns it back: stable.
  2. CG beyond the edge\text{CG beyond the edge}
    Weight's moment turns it further over: topples.
Common misconceptionSlanted distance Use the perpendicular distance from the pivot to the line of the force.
Pause and think

Why is a long spanner easier to use?

Solve a moments problem step by step
  1. Pick the pivot

    Take moments about the pivot (or about an unknown force, to remove it).

  2. Perpendicular distances

    Measure each distance from the pivot at right angles to the force\'s line of action.

  3. Clockwise and anticlockwise

    Sort each moment (F × d) into clockwise or anticlockwise.

  4. Balance

    In equilibrium: sum of clockwise moments = sum of anticlockwise moments.

Quick check

Why is a door handle placed far from the hinges?

Summary

  • Moment =Fd=Fd.
  • Equilibrium: moments and forces balance.
Key words
Centre of gravity
Point where weight seems to act.

Also on your syllabus

Key takeawayLevers and gears Levers and gears transmit the turning effect of a force. A lever lets a small force far from the pivot balance a large force near it. A small gear driving a larger gear makes the larger one turn more slowly but with a larger moment (turning effect); a large gear driving a small one makes it turn faster with a smaller moment.
  • Centre of gravity of a lamina: hang the shape from a pin so it swings freely, hang a plumb line from the same pin and draw along it; repeat from another point. The centre of gravity is where the lines cross.
History"Give me a place to stand." Archimedes studied levers around 250250 BC and supposedly said, "Give me a place to stand, and I shall move the Earth." With a long enough lever and a fixed pivot, a small force can produce a huge moment.
Fun factThe leaning tower stays up. The Tower of Pisa leans about 4∘4^\circ but doesn't fall because a vertical line from its centre of gravity still lands inside its base. Engineers in the 19901990s removed soil from under the high side to reduce the lean and keep it that way.
Keep reading for free

Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.