Forces and Motion
If the forces on an object are balanced, it stays at rest or keeps moving at constant velocity. An unbalanced (resultant) force makes it accelerate: . Friction and air resistance oppose motion, which is why a falling object reaches a terminal velocity. Moving in a circle needs a force towards the centre.
Builds on: Speed, velocity and acceleration, Mass, weight and density
On the AQA 8463 syllabus (First teaching 2016): 9 points this lesson covers
- 4.5.1.2 Contact and non-contact forces
- 4.5.1.4 Resultant forces
- 4.5.6.2.1 Newton's first law and inertia
- 4.5.6.2.2 Newton's second law (RP7)
- 4.5.6.2.3 Newton's third law
- 4.5.6.3.1 Stopping distance
- 4.5.6.3.2 Reaction time
- 4.5.6.3.3 Factors affecting braking distance
- 4.5.6.3.4 Braking forces and deceleration
Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.
Learning objectives
- Find the resultant of forces acting along a line.
- Explain that balanced forces mean constant velocity (or rest).
- Use to find force, mass or acceleration.
- Describe friction, drag, terminal velocity and the force needed for circular motion.
A car drives along a straight motorway at a steady m/s with its engine pushing it forward. Is there a resultant force on it?
Core idea
A delivery motorcycle pulls away from a junction. The engine pushes it forward and friction with the road pushes it back. It speeds up only when those forces are not equal. If they balance, Newton's first law says the motorcycle keeps a steady velocity, or stays still. The same idea explains a fielder pulling their hands back to catch a cricket ball: a longer stopping time means a smaller force on the hands.
The resultant force is what is left after the forces are combined. Balanced forces mean constant velocity, including staying at rest. An unbalanced force accelerates the object: . Weight is , and the question tells you which value of to use.
1. Resultant force
Add forces that point the same way and subtract forces that point the opposite way. The single force that replaces them is the resultant. In , is that resultant, not the engine force on its own. is the mass in kilograms and is the acceleration in m/s², in the direction of the resultant.
Weight is the pull of gravity: . Near the Earth, is about N/kg. A question prints the value to use. It is often N/kg, and sometimes N/kg. A student of mass kg then weighs N if , or N if . The mass is kg in either case. Do not mix the two values in one answer.
- where
- the resultant force, in newtons.
- mass, in kilograms.
- gravitational field strength. Use the value the question gives, often 10 N/kg or 9.8 N/kg.
A motorcycle and rider have a total mass of kg. The engine pushes forward with N and the resistive forces are N. Find the acceleration.
- Goal
- The acceleration, with its unit.
- Strategy
- Find the resultant first. Only then use .
- The forces are in opposite directions, so they subtract.
- This acceleration is forwards, the direction of the resultant.
A kg car has a driving force of N and a resistance of N. What is its acceleration?
2. Stopping distances
O Level 5054 and AQA 8463 ask you to split a stopping distance into two parts. Thinking distance is how far you travel at full speed during the reaction time, before the brakes start to work. Braking distance is how far you travel while the brakes are slowing you down. The stopping distance is the sum.
- The constant-acceleration equation. Take the direction of travel as positive.
- The final speed is , and the acceleration is a deceleration of size .
- Rearrange. The braking distance is proportional to the square of the speed.
A car travels at m/s. The driver's reaction time is s and the brakes give a deceleration of m/s². Find the thinking distance, the braking distance and the stopping distance.
- Goal
- Three distances.
- Strategy
- Thinking distance is speed × reaction time. Braking distance is .
- During the reaction time the speed has not changed yet.
- Braking distance from .
- Stopping distance is the two parts added.
- Thinking distance increases if the driver is tired, has been drinking alcohol, or is distracted.
- Braking distance increases with speed, on a wet road, or with worn tyres or brakes.
The speed of the car above is doubled and the deceleration stays m/s². What happens to the thinking distance and to the braking distance?
| Force | Acts | Example |
|---|---|---|
| Weight | Downwards, towards Earth's centre | W = mg |
| Normal reaction | At right angles to a surface | A book on a table |
| Friction | Opposing motion between surfaces | Brakes |
| Air resistance / drag | Opposing motion through a fluid | Parachute |
| Tension | Along a stretched string or rope | A lift cable |
| Upthrust | Upwards in a fluid | A floating boat |
- Start
A skydiver jumps: only weight acts, so they accelerate at about 10 m/s².
- Speeding up
Air resistance grows with speed, so the resultant force and acceleration fall.
- Terminal velocity
When air resistance equals weight the resultant force is zero: constant (terminal) velocity.
- Parachute opens
Air resistance jumps above weight: they decelerate to a new, lower terminal velocity.
A car moves at a steady 30 m/s. The driving force is 2000 N. What is the total resistive force?
Summary
- The resultant is the single force left after combining the forces. in means that resultant.
- Zero resultant: constant velocity, or staying at rest. A non-zero resultant changes the velocity.
- . Use the value of the question gives. Mass is in kg; weight is in N.
- Stopping distance = thinking distance + braking distance. Braking distance is proportional to speed squared.
- Resultant force
- The single force that has the same effect as all the forces acting together.
- Thinking distance
- Distance travelled at constant speed during the reaction time, before the brakes work.
- Braking distance
- Distance travelled while the brakes bring the object to rest.
Also on your syllabus
Types of force and free-body diagrams
- Forces you should be able to name: weight (gravitational force), friction, drag and air resistance, tension (elastic force in a stretched string or spring), electrostatic force, magnetic force, thrust (driving force), upthrust (from a fluid) and the contact (normal) force.
- A free-body diagram shows one object only, as a dot or box, with every force acting on it drawn as an arrow from the object, labelled, with longer arrows for bigger forces. A book resting on a table: weight down, contact force up, equal arrows.
- Inertia. Mass resists any change in an object's state of rest or motion. The bigger the mass, the bigger the resultant force needed for the same acceleration (): that resistance is inertia.
Newton's third law
- When object A exerts a force on object B, object B exerts an equal and opposite force on object A.
- The two forces of a third-law pair are always the same type of force and act on different objects, so they never cancel each other. The Earth pulls you down with your weight; you pull the Earth up with an equal gravitational force. A book's weight and the table's contact force on it are not a third-law pair: they are different types and both act on the book.
Stopping distance
- Thinking distance: how far the vehicle travels during the driver's reaction time, before the brakes are applied. Braking distance: how far it travels after the brakes are applied, until it stops. Stopping distance = thinking distance + braking distance.
- Thinking distance increases with speed, tiredness, alcohol, drugs and distractions. Braking distance increases with speed (roughly as speed squared), a heavier load, worn tyres or brakes, and wet, icy or loose road surfaces.
A driver's reaction time is 0.70 s at 20 m/s. What is the thinking distance?
Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.