Salam Academy
  1. Physical quantities and measurement

    Every physical quantity is a number with a unit. Measure carefully, and measure many small things together to reduce errors. Scalars have size only; vectors have size and direction, so two vectors at right angles combine by Pythagoras.

    ≈ 25 min
  2. Forces and motion

    If the forces on an object are balanced, it stays at rest or keeps moving at constant velocity. An unbalanced (resultant) force makes it accelerate: F=maF=ma. Friction and air resistance oppose motion, which is why a falling object reaches a terminal velocity. Moving in a circle needs a force towards the centre.

    ≈ 35 min
  3. Speed, velocity and acceleration

    Speed is distance per unit time; velocity is speed in a given direction. Acceleration is the rate of change of velocity. On a distance–time graph the gradient is speed; on a speed–time graph the gradient is acceleration and the area underneath is the distance travelled.

    ≈ 35 min
  4. Springs and Hooke's law

    A spring stretches in proportion to the load on it, F=kxF=kx, up to the limit of proportionality. The spring constant kk tells you how stiff it is. Extension is measured from the original length, and a load–extension graph is a straight line through the origin until the limit is passed.

    ≈ 25 min
  5. Turning effect and centre of gravity

    A force can turn an object about a pivot: its moment is force ×\times perpendicular distance from the pivot. When an object balances, the total clockwise moment equals the total anticlockwise moment. An object's weight acts at its centre of gravity; a low centre of gravity and wide base make it stable.

    ≈ 30 min
  6. Pressure

    Pressure is force per unit area, p=FAp=\dfrac FA, measured in pascals (11 Pa =1=1 N/m²). The same force on a smaller area gives a bigger pressure. In a liquid, pressure increases with depth and density: Δp=ρgΔh\Delta p=\rho g\Delta h.

    ≈ 25 min
  7. Momentum and impulse

    Momentum is mass times velocity, p=mvp=mv, and it has a direction. In any collision or explosion with no external force, the total momentum before equals the total after. A force changes momentum: F=ΔpΔtF=\dfrac{\Delta p}{\Delta t}, so spreading a change over a longer time means a smaller force.

    ≈ 30 min

What the AQA 8463 syllabus asks for in forces

  • 4.5.1.1 Scalars and vectors
  • 4.5.1.2 Contact and non-contact forces
  • 4.5.1.4 Resultant forces
  • 4.5.3 Forces and elasticity (RP6)
  • 4.5.4 Moments, levers and gears
  • 4.5.5.1.1 Pressure in a fluid
  • 4.5.5.1.2 Pressure with depth and upthrust
  • 4.5.5.2 Atmospheric pressure
  • 4.5.6.1.1 Distance and displacement
  • 4.5.6.1.2 Speed
  • 4.5.6.1.3 Velocity
  • 4.5.6.1.4 Distance-time graphs
  • 4.5.6.1.5 Acceleration and velocity-time graphs
  • 4.5.6.2.1 Newton's first law and inertia
  • 4.5.6.2.2 Newton's second law (RP7)
  • 4.5.6.2.3 Newton's third law
  • 4.5.6.3.1 Stopping distance
  • 4.5.6.3.2 Reaction time
  • 4.5.6.3.3 Factors affecting braking distance
  • 4.5.6.3.4 Braking forces and deceleration
  • 4.5.7.1 Momentum
  • 4.5.7.2 Conservation of momentum
  • 4.5.7.3 Changes in momentum and safety

Summarised in our own words from the official First teaching 2016 syllabus; each point is taught in the lessons above.