Springs and Hooke's Law
A spring stretches in proportion to the load on it, , up to the limit of proportionality. The spring constant tells you how stiff it is. Extension is measured from the original length, and a load–extension graph is a straight line through the origin until the limit is passed.
Builds on: Forces and motion
On the AQA 8463 syllabus (First teaching 2016): 1 point this lesson covers
- 4.5.3 Forces and elasticity (RP6)
Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.
Learning objectives
- Measure extension correctly from a spring's natural length.
- Use to find the spring constant, force or extension.
- Interpret load–extension graphs and identify the limit of proportionality.
- Describe an experiment to investigate how a spring stretches.
One N weight stretches a spring by cm. What would you predict for N? Would the pattern go on forever?
Core idea
Hang 1 N on a spring and it stretches 4 cm; hang 2 N and it stretches 8 cm. This simple doubling is why a spring can be marked as a scale. It works until you pull too hard.
Hooke's law: up to the limit of proportionality. Extension = stretched length − original length.
1. Extension
- where
- load (N).
- spring constant (N/m): stiffness.
- extension (m).
Original length 12.0 cm; with 4 N it is 28.0 cm.
- Goal
- ; load for a 10 cm extension.
- Strategy
- Extension, then .
- Extension, in metres.
- Rearrange.
- Use.
Two identical springs side by side share a load. Effect on extension?
A spring has k = 40 N/m. A 2.0 N weight is hung from it. What is the extension? What is the extension if two such springs are hung side by side (in parallel) sharing the load?
- Goal
- Both extensions.
- Strategy
- Use F = kx; in parallel each spring carries half the load.
m.
One spring takes the whole load.In parallel each spring carries 1.0 N, so m.
Load shared equally.
What does it mean if the force–extension graph stops being a straight line?
Summary
- Extension = new − original.
- , straight line through the origin.
- Spring constant
- Force per unit extension.
- Limit of proportionality
- End of the straight-line region.
Also on your syllabus
- Forces can change the size and shape of an object (stretching, squashing, bending), as well as its speed and direction.
Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.