Salam Academy
Electric and magnetic fields · Subtopic 10 of 11

Electromagnetic Induction

Magnetic flux through an area is Φ=BA\Phi=BA (with BB perpendicular to AA), measured in webers. For a coil of NN turns, flux linkage is NΦN\Phi. Faraday's law: the induced e.m.f. equals the rate of change of flux linkage. Lenz's law: the induced e.m.f. acts to oppose the change that causes it. Together: E=−Δ(NΦ)ΔtE=-\dfrac{\Delta(N\Phi)}{\Delta t}. A conductor of length LL moving at vv through a field BB has E=BLvE=BLv.

9PH0 past papers

Cambridge 9702 Paper 4Edexcel YPH11 WPH14AQA 7408 Paper 2Edexcel 9PH0 Paper 1≈ 40 minRevision 12 · updated

Builds on: Magnetic fields due to currents

On the Edexcel 9PH0 syllabus (First teaching 2015): 4 points this lesson covers
  • 124 Induced emf from motion
  • 125 Induced emf from a changing current
  • 126 Lenz's law
  • 127 Faraday's law

Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.

Section 1 of 14

Learning objectives

  • Define magnetic flux and flux linkage; use Φ=BA\Phi=BA.
  • State Faraday's and Lenz's laws.
  • Use E=−Δ(NΦ)ΔtE=-\dfrac{\Delta(N\Phi)}{\Delta t} and E=BLvE=BLv.
  • Explain the direction of induced currents in terms of energy conservation.
Pause and think

A magnet dropped through a copper tube falls very slowly, though copper isn't magnetic. Why?

Section 2 of 14

Core idea

Start hereA magnet that falls slowly

Drop a strong magnet down a copper pipe and it drifts down as if through honey, though copper isn't magnetic. The falling magnet induces currents in the pipe, and those currents push back. Changing magnetic flux always fights its own change.

The big idea

Φ=BA\Phi=BA; linkage NΦN\Phi. Faraday: ∣E∣=Δ(NΦ)Δt|E|=\frac{\Delta(N\Phi)}{\Delta t}. Lenz: opposes the change: E=−d(NΦ)dtE=-\frac{d(N\Phi)}{dt}. Moving rod: E=BLvE=BLv.

1. Flux and Faraday's law

Φ=BAcos⁡θE=−Δ(NΦ)Δt\Phi=BA\cos\theta\qquad E=-\frac{\Delta(N\Phi)}{\Delta t}
where
Φ\Phi
flux (Wb = T m²).
NΦN\Phi
flux linkage.
θ\theta
angle between BB and the normal to the coil.
Worked exampleA collapsing field

200 turns, area 4.0×10−34.0\times10^{-3} m², BB: 0.50 T → 0 in 0.10 s.

Goal
Average e.m.f.
Strategy
Change in linkage ÷ time.
  1. Δ(NΦ)=200×0.50×4.0×10−3=0.40 Wb\Delta(N\Phi)=200\times0.50\times4.0\times10^{-3}=0.40\text{ Wb}
    Linkage lost.
  2. E=0.400.10=4.0 VE=\frac{0.40}{0.10}=4.0\text{ V}
    Faraday.
Answer4.04.0 V.
✓ CheckFaster switch-off gives a bigger e.m.f. ✓.
Moving rod: E=BLvE=BLv
  1. ΔA=LvΔt\Delta A=Lv\Delta t
    Area swept by a rod of length LL moving at vv.
  2. E=BΔAΔt=BLvE=\frac{B\Delta A}{\Delta t}=BLv
    Rate of flux cut.
Worked exampleA sliding rod

0.5 m rod at 4 m s−1^{-1} across 0.3 T.

Goal
e.m.f.
Strategy
BLvBLv.
  1. Lv=2 m2 s−1Lv=2\text{ m}^2\text{ s}^{-1}
    Area swept per second.
  2. E=0.3×2=0.6 VE=0.3\times2=0.6\text{ V}
    Flux cut per second.
Answer0.60.6 V.
✓ CheckUnits: T m² s−1^{-1} = V ✓.

2. Rotating coil

A coil rotating in a uniform magnetic field
NSnormalθMagnetic field BCoil: N turns, area ASlip rings and brushes

Tap a label with a dotted underline to find out what it is.

Flux linkage NΦ = BAN cos θ. With θ = ωt, the induced e.m.f. = BANω sin ωt: largest when the coil is parallel to the field (flux changing fastest), zero when it is perpendicular.
Describe this diagram in words

A flat rectangular coil sits between the north and south poles of a magnet and rotates about a vertical axis. Field lines run from N to S. The normal to the coil makes angle θ with the field. Slip rings and brushes at the bottom connect the coil to the outside circuit.

Flux linkage and induced e.m.f. for a rotating coil
24681012−1−0.50.511.50timeflux linkage NΦe.m.f. = −d(NΦ)/dt
The e.m.f. is largest when the flux is changing fastest (passing through zero), and zero when the flux is at a maximum.
Common misconceptionFlux vs rate of change Maximum e.m.f. occurs when flux is zero (changing fastest), not maximum.
Pause and think

Why does the magnet fall slowly through copper?

Laws of electromagnetic induction
LawStatementEquation
FaradayInduced e.m.f. equals the rate of change of flux linkageε=−Δ(NΦ)Δt\varepsilon=-\frac{\Delta(N\Phi)}{\Delta t}
LenzThe induced current opposes the change causing itThe minus sign
FluxΦ = BA (B normal to A)Wb
Quick check

Why does a magnet fall more slowly through a copper tube than a plastic one?

Summary

  • E=−d(NΦ)/dtE=-d(N\Phi)/dt.
  • Lenz: opposes the change.
Key words
Weber
Unit of flux, T m².
Flux linkage
NΦN\Phi.
A coil rotating in a field: flux linkage and induced e.m.f.
timeflux linkage / e.m.f.flux linkage NΦe.m.f. = −d(NΦ)/dt
By Faraday's law the e.m.f. is minus the gradient of the flux-linkage graph: it is zero when the flux linkage is greatest and largest when the flux linkage passes through zero.

Also on your syllabus

Key takeawayA changing current in a linked coil An e.m.f. is induced whenever the flux linkage of a coil changes, and the flux need not come from a moving magnet. If two coils share an iron core, a changing current in the first coil changes the flux through the second, so an e.m.f. is induced in the second coil even though nothing moves (mutual induction). A steady direct current gives no induced e.m.f.; an alternating current gives an alternating e.m.f. This is how a transformer works.
HistoryFaraday's ring. On 2929 August 18311831 Michael Faraday wound two coils on an iron ring. Switching the current in one made a galvanometer connected to the other twitch, but only at the moment of switching. He'd discovered that it's changing magnetism that makes electricity, the principle behind every generator and transformer.
Fun factInduction hobs. An induction cooker has a coil under the glass carrying alternating current at about 2525 kHz. The rapidly changing flux induces eddy currents in the iron pan base, heating it directly. The glass stays relatively cool, and an aluminium pan won't work well.
Keep reading for free

Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.