Salam Academy
Electric and magnetic fields · Subtopic 11 of 11

Characteristics of Alternating Currents

An alternating current reverses direction periodically: I=I0sin⁡ωtI=I_0\sin\omega t, with peak value I0I_0, period TT and frequency f=1Tf=\dfrac1T. The power in a resistor, I2RI^2R, varies between 00 and I02RI_0^2R, so the mean power is 12I02R\tfrac12I_0^2R. The r.m.s. value is the steady d.c. value giving the same mean power: Irms=I02I_{\text{rms}}=\dfrac{I_0}{\sqrt2} and Vrms=V02V_{\text{rms}}=\dfrac{V_0}{\sqrt2}. Pakistan's mains is 230230 V r.m.s., peaking at about 325325 V.

9PH0 past papers

Cambridge 9702 Paper 4AQA 7408 Paper 2Edexcel 9PH0 Paper 1≈ 30 minRevision 9 · updated

Builds on: Electromagnetic induction

On the Edexcel 9PH0 syllabus (First teaching 2015): 2 points this lesson covers
  • 128 Alternating current
  • 129 Peak and rms values

Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.

Section 1 of 14

Learning objectives

  • Use period, frequency and peak value for a.c.
  • Use x=x0sin⁡ωtx=x_0\sin\omega t for a.c. currents and voltages.
  • Explain why mean power is half the peak power.
  • Define and use r.m.s. values.
Pause and think

Mains is "230230 V", but an oscilloscope shows it swinging between +325+325 V and −325-325 V. Which is the real voltage?

Section 2 of 14

Core idea

Start hereWhat does "230 V" mean?

Mains voltage swings between +325 V and −325 V fifty times a second. Its average is zero, yet a heater clearly gets hot. "230 V" is the steady voltage that would heat it just as well: the r.m.s. value.

The big idea

V=V0sin⁡ωtV=V_0\sin\omega t. Vrms=V02V_{\text{rms}}=\frac{V_0}{\sqrt2}; mean power = half the peak power.

1. r.m.s. values

Voltage and power in a resistor on a.c.
24681012−1−0.50.510timeVpower ∝ V²mean power = ½ peakV rms = V₀/√2
Power is always positive (heating happens in both directions) and averages half its peak. That is why Vrms=V0/2V_{\text{rms}}=V_0/\sqrt2.
Why V02\frac{V_0}{\sqrt2}
  1. P=V2R=V02Rsin⁡2ωtP=\frac{V^2}R=\frac{V_0^2}R\sin^2\omega t
    Instantaneous power.
  2. ⟨sin⁡2ωt⟩=12\langle\sin^2\omega t\rangle=\tfrac12
    sin⁡2=12(1−cos⁡2ωt)\sin^2=\frac12(1-\cos2\omega t); the cosine averages to zero.
  3. ⟨P⟩=V022R=(V0/2)2R\langle P\rangle=\frac{V_0^2}{2R}=\frac{(V_0/\sqrt2)^2}R
    Same as a d.c. voltage V0/2V_0/\sqrt2.
Worked exampleUK-style mains

Peak 325 V, 50 Hz; 100 Ω heater.

Goal
r.m.s.; TT, ω\omega; mean and peak power.
Strategy
Formulas.
  1. 3252=230 V\frac{325}{\sqrt2}=230\text{ V}
    r.m.s.
  2. T=20 ms, ω=2π(50)=314 rad s−1T=20\text{ ms},\ \omega=2\pi(50)=314\text{ rad s}^{-1}
    Timing.
  3. ⟨P⟩=2302100=529 W, P0=3252100=1056 W\langle P\rangle=\frac{230^2}{100}=529\text{ W},\ P_0=\frac{325^2}{100}=1056\text{ W}
    Mean is half the peak.
Answer230230 V; 2020 ms, 314314 rad s−1^{-1}; 529529 W mean, 10561056 W peak.
✓ Check1056/2=5281056/2=528 ✓.
Common misconceptionMean voltage The mean of a sine wave over a cycle is zero: use r.m.s.
Worked examplePeak and r.m.s. values

Mains electricity is 230 V r.m.s. What is the peak voltage? A 1.0 kW heater runs on it: what is the r.m.s. current?

Goal
Peak voltage and r.m.s. current.
Strategy
V0=2VrmsV_0=\sqrt2V_{rms}; P=VrmsIrmsP=V_{rms}I_{rms}.
  1. V0=2×230=325V_0=\sqrt2\times230=325 V.

    Peak is √2 times r.m.s.
  2. Irms=1000230=4.3I_{rms}=\frac{1000}{230}=4.3 A.

    Mean power uses r.m.s. values.
Answer325 V; 4.3 A
✓ Checkr.m.s. values give the same heating effect as a d.c. of that size ✓.
Quick check

What does the r.m.s. value of an alternating current mean?

Summary

  • Vrms=V0/2V_{\text{rms}}=V_0/\sqrt2.
  • Mean power half of peak.
Key words
r.m.s.
Root-mean-square: equivalent d.c. value.
HistoryThe war of the currents. In the 18801880s Thomas Edison championed direct current, while Nikola Tesla and George Westinghouse pushed alternating current. A.c. won because transformers can step its voltage up for efficient long-distance transmission and down again for homes, something d.c. couldn't do easily then.
Fun factWhy lights don't flicker. On a 5050 Hz supply, the current passes through zero 100100 times a second, so a filament lamp's power dips 100100 times a second. The filament stays hot between dips, and anyway our eyes can't follow flicker that fast.
Keep reading for free

Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.