Salam Academy
Energy · Subtopic 2 of 3

Transfer of Thermal Energy

Thermal energy moves from hotter to colder places in three ways. Conduction passes vibrations between particles (and free electrons in metals). Convection carries energy as warm, less dense fluid rises. Radiation is infrared waves, which need no material at all. Dull black surfaces are the best emitters and absorbers; shiny surfaces are the best reflectors.

8463 past papers

Cambridge 5054 Paper 1Cambridge 5054 Paper 2Cambridge 0625 Papers 2, 4Cambridge 0625 Papers 1, 3Edexcel 4PH1 Paper 1PEdexcel 4PH1 Paper 2P≈ 30 minRevision 11 · updated

Builds on: Kinetic particle model and gases

On the AQA 8463 syllabus (First teaching 2016): 2 points this lesson covers
  • 4.6.3.1 Emission and absorption of infrared
  • 4.6.3.2 Black bodies and Earth's temperature

Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.

Section 1 of 14

Learning objectives

  • Explain conduction, including why metals are good conductors.
  • Explain convection currents in terms of density.
  • Describe infrared radiation and the effect of surface colour and texture.
  • Apply all three to everyday examples such as heaters, insulation and the vacuum flask.
Pause and think

On a cold morning, a metal bench and a wooden bench are at the same temperature. Why does the metal one feel much colder to sit on?

Section 2 of 14

Core idea

Start hereWhy a metal spoon feels colder than wood

A metal spoon and a wooden spoon in the same drawer are at the same temperature, yet the metal feels colder. It isn't colder; it carries heat away from your hand faster. Heat moves in three ways, and each needs different conditions.

The big idea

Conduction: vibrations and free electrons in solids. Convection: warm fluid rises because it's less dense. Radiation: infrared waves, needs no medium.

1. Conduction

Why metals conduct best
  1. hot end: particles vibrate more\text{hot end: particles vibrate more}
    Pass energy to neighbours: slow.
  2. metals: free electrons\text{metals: free electrons}
    Move quickly through the lattice, carrying energy far: fast.
Air and plastics have no free electrons and widely spaced particles: insulators.

2. Convection

A convection current in a pan of water
hot water risescools, sinksheat
Water above the flame expands, becomes less dense and rises; cooler, denser water sinks to take its place.
A convection current

Only in fluids (liquids and gases): particles must be free to move.

3. Radiation

Cooling of two identical cans of hot water
05101520253020304050607080time (minutes)temperature (°C)matt black canshiny can
The black can radiates energy faster, so it cools more quickly.
  • Dull black: best absorber and emitter.
  • Shiny silver: worst (best reflector).
  • Travels through a vacuum (sunlight).
Worked exampleA vacuum flask

Explain each feature.

Goal
Link features to transfers.
Strategy
One transfer at a time.
  1. Vacuum: no particles, so no conduction or convection across the gap.

  2. Silvered walls: reflect infrared, reducing radiation.

  3. Stopper: reduces convection and evaporation at the top.

AnswerAll three transfers are reduced.
✓ CheckKeeps cold drinks cold too ✓.
Common misconception"Heat rises" Hot fluid rises; heat itself spreads in all directions by conduction and radiation.
Pause and think

Why is the freezer at the top of old fridges?

Three ways energy is transferred by heating
MethodHowNeeds a medium?Main in
ConductionVibrating particles pass energy on; free electrons in metalsYesSolids, especially metals
ConvectionWarm fluid expands, becomes less dense and risesYesLiquids and gases
RadiationInfrared electromagnetic wavesNoEverything, even a vacuum
Quick check

Explain how a vacuum flask keeps a drink hot.

Summary

  • Conduction, convection, radiation.
  • Black emits/absorbs best.
Key words
Infrared
Thermal radiation.
Insulator
Poor conductor.

Also on your syllabus

  • Staying at a constant temperature. An object stays at a constant temperature only when it transfers energy away at the same rate as it receives energy.
  • If an object receives energy faster than it loses it, its temperature rises. If it loses energy faster than it receives it, its temperature falls. As an object gets hotter it radiates faster, so it settles at a new, higher temperature where the rates balance again.
  • The Earth's temperature depends on the balance between the radiation it absorbs from the Sun and the infrared radiation it emits into space. Clouds, ice and snow reflect sunlight; greenhouse gases such as carbon dioxide and methane absorb some of the infrared the Earth emits and send part of it back. More greenhouse gas tips the balance, and the Earth warms until the rates balance again.
  • Everyday uses. A domestic radiator heats the air next to it, which rises and sets up a convection current round the room. A vacuum flask stops conduction and convection with a vacuum and cuts radiation with silvered walls. A refrigerator's freezer compartment sits at the top so cooled air sinks through the cabinet.
Key takeawayPerfect black bodies Every object emits and absorbs infrared radiation, and hotter objects emit more, at shorter wavelengths. A perfect black body absorbs all the radiation that falls on it, reflects and transmits none, and is also the best possible emitter. An object stays at a constant temperature when it absorbs radiation at the same rate as it emits it; it warms up if it absorbs faster. The Earth's temperature depends on this balance: sunlight absorbed, infrared emitted, and the infrared absorbed and re-emitted by the atmosphere.
  • Rate of emission of infrared radiation increases with surface temperature and with surface area; dull black surfaces emit and absorb best.
HistoryHerschel finds infrared. In 18001800 William Herschel split sunlight with a prism and put thermometers in each colour. The thermometer just beyond the red end, where there was no visible light at all, got hottest. He had discovered infrared radiation.
Fun factPenguins huddle by physics. Emperor penguins survive Antarctic winters at −40-40 °C by huddling in groups of thousands. Huddling reduces the surface area each penguin exposes to the cold, cutting energy loss by up to half.
Keep reading for free

Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.