Salam Academy
Energy · Subtopic 1 of 3

Energy, Work and Power

Energy is stored in kinetic, gravitational, elastic, chemical, thermal, nuclear and other stores, and transferred by forces, heating, electrical currents and waves. It's never created or destroyed. Work done is energy transferred by a force, W=FdW=Fd. Power is the rate of transfer, P=WtP=\dfrac Wt. Efficiency is the fraction of input energy that ends up useful.

8463 past papers

Cambridge 5054 Paper 1Cambridge 5054 Paper 2Cambridge 0625 Papers 2, 4Cambridge 0625 Papers 1, 3Edexcel 4PH1 Paper 1PEdexcel 4PH1 Paper 2P≈ 35 minRevision 10 · updated

Builds on: Forces and motion

On the AQA 8463 syllabus (First teaching 2016): 6 points this lesson covers
  • 4.1.1.1 Energy stores and systems
  • 4.1.1.2 Kinetic, gravitational and elastic energy
  • 4.1.1.4 Power
  • 4.1.2.1 Conservation and dissipation of energy (RP2)
  • 4.1.2.2 Efficiency
  • 4.5.2 Work done

Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.

Section 1 of 14

Learning objectives

  • Name energy stores and describe energy transfers.
  • Calculate kinetic energy and changes in gravitational potential energy.
  • Use conservation of energy to find speeds and heights.
  • Calculate work done, power and efficiency.
Pause and think

A ball is dropped from a height. Just before it hits the ground, where did its kinetic energy come from? And after a few bounces it stops: where did the energy go?

Section 2 of 14

Core idea

Start hereA roller coaster has no engine on the way down

A coaster is hauled to the top once. After that, every hill and loop is paid for by the energy stored at the top, swapped back and forth between height and speed. Energy is never created or destroyed, only moved between stores.

The big idea

Ek=12mv2E_k=\frac12mv^2; Ep=mghE_p=mgh; work W=FdW=Fd; power P=EtP=\frac Et; efficiency =useful outtotal in=\frac{\text{useful out}}{\text{total in}}.

1. Kinetic and potential energy

A 2 kg ball falling 20 m: energy changes store
0.511.522.533.541002003004000energy (J)gravitational PEkinetictotal
mgh=2×10×20=400mgh=2\times10\times20=400 J at the top. Just before landing all 400 J is kinetic: 12(2)v2=400\tfrac12(2)v^2=400, v=20v=20 m/s.
Where 12mv2\frac12mv^2 comes from
  1. W=Fs=ma⋅sW=Fs=ma\cdot s
    Work to accelerate from rest.
  2. s=v22as=\frac{v^2}{2a}
    Constant acceleration from rest.
  3. W=ma⋅v22a=12mv2W=ma\cdot\frac{v^2}{2a}=\tfrac12mv^2
    aa cancels.
Worked example2 kg ball dropped from 20 m

GPE at the top; speed at the bottom (no air resistance).

Goal
EpE_p, vv.
Strategy
All GPE becomes KE.
  1. Ep=2×10×20=400 JE_p=2\times10\times20=400\text{ J}
    mghmgh.
  2. 12(2)v2=400⇒v=20 m/s\tfrac12(2)v^2=400\Rightarrow v=20\text{ m/s}
    Energy conserved.
Answer400400 J; 2020 m/s.
✓ Checkv=2gh=400v=\sqrt{2gh}=\sqrt{400}; independent of mass ✓.

2. Work and power

Worked exampleLifting 50 kg

Up 12 m in 20 s.

Goal
Work and power.
Strategy
Force = weight.
  1. W=500×12=6000 JW=500\times12=6000\text{ J}
    mg=500mg=500 N.
  2. P=6000÷20=300 WP=6000\div20=300\text{ W}
    Energy per second.
Answer60006000 J; 300300 W.
✓ CheckEquals the GPE gained, mghmgh ✓.

3. Efficiency

Energy flow in a filament lamp: only 10% useful
electrical 100 Jlight 10 J (useful)heat 90 J (wasted)
Efficiency =10100=10%=\dfrac{10}{100}=10\%. An LED gives much more light for the same input.
Worked exampleA 60 W lamp at 10%

Energy per second.

Goal
Useful and wasted.
Strategy
Efficiency × input.
  1. 0.10×60=6 J0.10\times60=6\text{ J}
    Useful (light).
  2. 60−6=54 J60-6=54\text{ J}
    Wasted (heat).
Answer66 J light; 5454 J heat.
✓ CheckTotal conserved: 6060 J ✓.
Common misconceptionEfficiency over 100% Impossible: check you divided useful by total.
Pause and think

A motor uses 500 J to give 200 J useful. Efficiency?

Energy equations
QuantityEquationUnit
Kinetic energyEk=12mv2E_k=\frac12mv^2J
Gravitational potential energyΔEp=mgΔh\Delta E_p=mg\Delta hJ
Work doneW = FdJ
PowerP=Et=WtP=\frac{E}{t}=\frac{W}{t}W
Efficiencyuseful output ÷ total input × 100%%
Quick check

Why can no machine be 100% efficient?

Summary

  • Energy conserved; stores change.
  • W=FdW=Fd; P=E/tP=E/t; efficiency.
Key words
Joule
Unit of energy.
Watt
Joule per second.

Also on your syllabus

Key takeawaySankey diagrams A Sankey diagram shows energy transfers as arrows whose widths are proportional to the energy. The input arrow splits into a useful arrow and wasted arrows (usually heat), and the widths of the outputs add up to the input: energy is conserved.

Energy stores and systems

  • Energy stores: kinetic, gravitational potential, elastic potential, thermal (internal), chemical, nuclear, magnetic and electrostatic.
  • A system is an object or group of objects you choose to study. When a system changes, energy moves between its stores: a ball thrown upwards moves energy from the kinetic store to the gravitational store; a kettle moves energy from the chemical store at the power station, through the electric current, to the thermal store of the water.
  • Energy is transferred by heating, by forces doing work (mechanical work) and by an electric current doing work.
  • In a closed system (nothing enters or leaves), the total energy stays the same: energy is conserved.
Key takeawayDissipation In every real transfer, some energy is dissipated: it spreads out into the thermal stores of the surroundings, where it is no longer useful. It is still there, just wasted. Reduce unwanted transfers by lubrication (less friction), thermal insulation (thicker walls, lower thermal conductivity), and streamlining.
  • Conservation of energy: energy cannot be created or destroyed, only transferred from one store to another; the total stays the same.
  • Energy stores include kinetic, gravitational potential, chemical, elastic (strain), nuclear, internal (thermal) and electrostatic.
HistoryJoule's paddle wheel. In 18451845 James Joule let falling weights turn a paddle wheel in a tank of water, and measured the tiny temperature rise. He showed that a fixed amount of mechanical work always produced the same amount of heating, proving heat is a form of energy transfer. The unit of energy is named after him.
Fun factA chocolate bar could lift you up a skyscraper. A 5050 g chocolate bar stores about 1 000 0001\,000\,000 J. Lifting a 6060 kg person 11 m takes about 600600 J, so in theory the bar could lift you 17001700 m. Muscles are only about 25%25\% efficient, so you'd manage around 400400 m.
Keep reading for free

Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.