Salam Academy
Particle model of matter · Subtopic 2 of 4

Kinetic Particle Model and Gases

Everything is made of tiny particles in constant motion. In solids they vibrate in fixed positions; in liquids they move past each other; in gases they move fast and far apart. Gas pressure comes from particles hitting the walls. Temperature in kelvin starts at absolute zero, and for a fixed mass of gas at constant temperature pVpV is constant.

8463 past papers

Cambridge 5054 Paper 1Cambridge 5054 Paper 2Cambridge 0625 Papers 2, 4Cambridge 0625 Papers 1, 3Edexcel 4PH1 Paper 1PEdexcel 4PH1 Paper 2P≈ 30 minRevision 11 · updated

Builds on: Mass, weight and density, Pressure

On the AQA 8463 syllabus (First teaching 2016): 3 points this lesson covers
  • 4.3.3.1 Particle motion in gases
  • 4.3.3.2 Gas pressure and volume
  • 4.3.3.3 Doing work on a gas

Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.

Section 1 of 14

Learning objectives

  • Describe solids, liquids and gases using the particle model.
  • Explain Brownian motion and gas pressure in terms of particles.
  • Convert between °C and K, and explain absolute zero.
  • Use p1V1=p2V2p_1V_1=p_2V_2 for a gas at constant temperature.
Pause and think

You squeeze a sealed syringe of air with your thumb over the end. It gets harder to push. Why, in terms of air particles?

Section 2 of 14

Core idea

Start hereDancing smoke

Under a microscope, specks of smoke jiggle about randomly even in still air. They're being knocked by air molecules far too small to see. That jiggling, Brownian motion, is evidence that all matter is made of moving particles.

The big idea

Solids vibrate in place; liquids slide past each other; gases move fast and freely. Gas pressure is from collisions with walls. At constant temperature pVpV = constant. T(K)=θ(∘C)+273T(\text{K})=\theta(^\circ\text{C})+273.

1. States of matter

Solid, liquid and gas
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●solid: fixed, vibratingliquid: close, flowinggas: far apart, fast
Solids keep their shape; liquids take the shape of the container but keep their volume; gases fill any container.
  • Solid: close, regular, vibrate; fixed shape and volume.
  • Liquid: close, irregular, moving; fixed volume.
  • Gas: far apart, fast, random; fills the container.

2. Gas pressure

Gas at constant temperature: halve the volume, double the pressure
204060801001002003004000volume (cm³)pressure (kPa)pV = constant(50, 200)(100, 100)
Squeezing the gas into less space means particles hit each square centimetre of wall more often. p1V1=p2V2p_1V_1=p_2V_2.
Why pVpV is constant (qualitatively)
  1. V→12VV\to\tfrac12V
    Same particles in half the space.
  2. collisions per second×2\text{collisions per second}\times2
    Particles hit the walls twice as often (same speed: same temperature).
  3. p→2pp\to2p
    So pVpV is unchanged.
Worked exampleSqueezing a gas

6 L at 100 kPa squeezed to 3 L, same temperature.

Goal
New pressure.
Strategy
p1V1=p2V2p_1V_1=p_2V_2.
  1. 100×6=p2×3100\times6=p_2\times3
    Boyle's law.
  2. p2=200 kPap_2=200\text{ kPa}
    Solve.
Answer200200 kPa.
✓ CheckVolume halved, pressure doubled ✓.
Edge caseAbsolute zero At 00 K =−273∘=-273^\circC particles have minimum energy; nothing can be colder.
Pause and think

Why does a balloon shrink in a freezer?

Quick check

Explain, using particles, why a gas exerts pressure on its container.

Try it: particles and pressure

Pressure = 1.00 × the starting pressure (p ∝ NT/V). Wall hits per second: 0. Hotter particles move faster and hit the walls harder and more often; a smaller volume means more hits on each part of the wall.

Pressure comes from particles hitting the walls. Try halving the volume at constant temperature (Boyle's law) or doubling the kelvin temperature at constant volume.

Summary

  • Kinetic model of matter.
  • Pressure from collisions; pV=pV= const.
Key words
Brownian motion
Random motion of small particles from molecular collisions.

Also on your syllabus

  • Names for every change of state. Solid → liquid: melting. Liquid → solid: solidifying (freezing). Liquid → gas: boiling or evaporation. Gas → liquid: condensation. Solid → gas directly: sublimation (dry ice, solid CO₂). Gas → solid directly: deposition (frost forming on a cold window).
  • Forces and distances between particles. In a solid the particles are close together and held in fixed positions by strong forces of attraction. In a liquid they are still close but the forces are weaker relative to their energy, so they slide past each other. In a gas the particles are far apart and the forces between them are almost zero, except during collisions. This is why gases are easy to compress and solids are not.
  • Why the smoke specks move. Air molecules are tiny and light but move very fast (hundreds of metres per second). Each one hits a smoke speck only a little, but at any instant more hit one side than the other, so the much larger, heavier speck is pushed first one way and then another. Light, fast-moving molecules moving large particles in this random way is Brownian motion.
Exam tipGas pressure in two steps Particles hit the walls and change momentum, so each collision exerts a force on the wall. Pressure is the total force of these collisions per unit area of the wall.
Key takeawayPressure and temperature of a gas For a fixed mass of gas at constant volume, pressure is proportional to Kelvin temperature: p1T1=p2T2\frac{p_1}{T_1}=\frac{p_2}{T_2}. Hotter molecules move faster, hit the walls more often and harder. Always use kelvin: 27 °C = 300 K.
  • Temperature and kinetic energy: the Kelvin temperature of a gas is proportional to the average kinetic energy of its particles.
HistoryRobert Brown's pollen. In 18271827 the botanist Robert Brown saw tiny particles from pollen grains jiggling in water under his microscope. He couldn't explain it. In 19051905 Einstein showed it was caused by invisible water molecules bumping into them: some of the first convincing evidence that atoms are real.
Fun factAir molecules are faster than jets. At room temperature, a typical oxygen molecule moves at about 450450 m/s, faster than a passenger jet. They don't get far, though: each one collides with another roughly every 0.00000000010.0000000001 s.
Keep reading for free

Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.