Salam Academy
Thermodynamics · Subtopic 5 of 5

The Ideal Gas Equation

One mole contains NA=6.02×1023N_A=6.02\times10^{23} particles. An ideal gas obeys pV=nRTpV=nRT, where nn is the number of moles, R=8.31R=8.31 J mol⁻¹ K⁻¹ and TT is in kelvin. Equivalently pV=NkTpV=NkT, with NN molecules and the Boltzmann constant k=RNA=1.38×10−23k=\dfrac R{N_A}=1.38\times10^{-23} J K⁻¹. Boyle's law, Charles's law and the pressure law are special cases.

9PH0 past papers

Cambridge 9702 Paper 4Edexcel YPH11 WPH15AQA 7408 Paper 2Edexcel 9PH0 Paper 2≈ 35 minRevision 12 · updated

Builds on: Thermal equilibrium and temperature scales

On the Edexcel 9PH0 syllabus (First teaching 2015): 2 points this lesson covers
  • 150 Ideal gas equation
  • 151 Pressure and volume (core practical 14)

Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.

Section 1 of 14

Learning objectives

  • Use the mole, NAN_A and molar mass to find numbers of particles.
  • Use pV=nRTpV=nRT and pV=NkTpV=NkT, with TT in kelvin.
  • Use p1V1T1=p2V2T2\dfrac{p_1V_1}{T_1}=\dfrac{p_2V_2}{T_2} for a fixed mass of gas.
  • State the conditions under which real gases behave ideally.
Pause and think

A car tyre is pumped to 2.22.2 bar on a cold 55 °C morning. After a long drive the air inside reaches 4545 °C. Roughly how much has the pressure risen?

Section 2 of 14

Core idea

Start hereTyres on a hot day

Drive on a summer motorway and your tyre pressure rises. The air inside hasn't changed in amount or volume, only temperature. One equation links pressure, volume, temperature and amount for any gas that behaves ideally.

The big idea

pV=nRT=NkTpV=nRT=NkT (TT in kelvin). R=8.31R=8.31 J mol−1^{-1} K−1^{-1}; k=RNA=1.38×10−23k=\frac R{N_A}=1.38\times10^{-23} J K−1^{-1}.

1. The equation

Investigating Boyle's law
pumplength ∝ VTrapped airOilPressure gaugeOil reservoir

Tap a label with a dotted underline to find out what it is.

Pump slowly and wait between readings so the temperature stays constant. Plot p against 1/V: a straight line through the origin shows pV is constant for a fixed mass of gas.
Describe this diagram in words

A vertical glass tube with a scale beside it holds a column of trapped air above oil. The oil connects to a reservoir, which a pump can pressurise, and a pressure gauge reads the pressure. The length of the air column is proportional to its volume.

pV=nRT=NkTpV=nRT=NkT
where
nn
moles.
NN
molecules (N=nNAN=nN_A).
TT
kelvin.
Isotherms: pV = nRT at three temperatures (1 mol)
10203040501002003004005006000volume (×10⁻³ m³)pressure (kPa)200 K300 Khotter
Each curve is p∝1Vp\propto\dfrac1V. Hotter gas has a higher curve: more pressure at the same volume.
Worked exampleMolar volume

1 mol at 273 K and 100 kPa.

Goal
VV.
Strategy
Rearrange.
  1. V=nRTp=8.31×2731.0×105V=\frac{nRT}p=\frac{8.31\times273}{1.0\times10^5}
    Substitute.
  2. =0.0227 m3=22.7 L=0.0227\text{ m}^3=22.7\text{ L}
    Evaluate.
Answer22.722.7 litres.
✓ CheckStandard textbook value ✓.
Worked exampleA warming tyre

250 kPa at 15 °C → 40 °C, fixed volume.

Goal
p2p_2.
Strategy
pT\frac pT constant (kelvin).
  1. 288 K→313 K288\text{ K}\to313\text{ K}
    Convert.
  2. p2=250×313288=272 kPap_2=250\times\frac{313}{288}=272\text{ kPa}
    Ratio.
Answer272272 kPa.
✓ CheckUsing °C would give 667 kPa: absurd ✓.
Worked exampleCounting molecules

2.0×10−32.0\times10^{-3} m³ at 300 K and 150 kPa.

Goal
NN.
Strategy
N=pVkTN=\frac{pV}{kT}.
  1. pV=150×103×2.0×10−3=300 JpV=150\times10^3\times2.0\times10^{-3}=300\text{ J}
    Numerator.
  2. N=3001.38×10−23×300=7.2×1022N=\frac{300}{1.38\times10^{-23}\times300}=7.2\times10^{22}
    Divide.
Answer7.2×10227.2\times10^{22}.
✓ Check≈0.12\approx0.12 mol ✓.
Common misconceptionCelsius Always kelvin in gas laws: they're proportionalities from absolute zero.
The gas laws
LawConstantRelationship
Boyle'sTemperaturepV = constant
Charles'sPressureV/T = constant
Pressure lawVolumep/T = constant
Ideal gas equation—pV = nRT = NkT
Temperatures must be in kelvin.
Quick check

Why must temperatures in the gas laws be in kelvin?

Try it: particles and pressure

Pressure = 1.00 × the starting pressure (p ∝ NT/V). Wall hits per second: 0. Hotter particles move faster and hit the walls harder and more often; a smaller volume means more hits on each part of the wall.

Pressure comes from particles hitting the walls. Try halving the volume at constant temperature (Boyle's law) or doubling the kelvin temperature at constant volume.

Summary

  • pV=nRT=NkTpV=nRT=NkT.
  • Kelvin always.
Key words
Mole
6.02×10236.02\times10^{23} particles.
Ideal gas
Obeys pV=nRTpV=nRT exactly.
Isotherms for 0.10 mol of an ideal gas
246810501001502002503000volume V (litres)pressure p (kPa)T = 300 KT = 600 K(2.0, 125)(4.0, 62)
At constant temperature pV=nRTpV=nRT is constant, so doubling the volume halves the pressure. A hotter gas has a larger pVpV, so its curve lies further from the axes.

Also on your syllabus

  • Avogadro constant: NA=6.02×1023N_A=6.02\times10^{23} mol⁻¹, so N=nNAN=nN_A and pV=NkTpV=NkT with k=R/NAk=R/N_A.
HistoryBoyle's air pump. In 16621662 Robert Boyle, with his assistant Robert Hooke, trapped air in a J-shaped tube with mercury and showed that halving the volume doubled the pressure. It was one of the first physical laws expressed as a mathematical relationship from careful measurement.
Fun factA breath of Caesar. Each breath contains about 102210^{22} molecules. Atmospheric mixing over two thousand years means that, on average, every breath you take probably contains around one molecule from Julius Caesar's last breath. Avogadro's number is that big.
Keep reading for free

Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.