Salam Academy
Thermodynamics · Subtopic 3 of 5

Thermal Equilibrium and Temperature Scales

Thermal energy flows from hotter to colder regions until they reach the same temperature: thermal equilibrium. Any property that changes with temperature (length of mercury, resistance, thermocouple e.m.f.) can make a thermometer, but different properties don't agree between fixed points. The thermodynamic scale doesn't depend on any substance: its zero is absolute zero, and T/K=θ/°C+273.15T/\text{K}=\theta/°\text{C}+273.15.

9PH0 past papers

Cambridge 9702 Paper 4Edexcel YPH11 WPH15AQA 7408 Paper 2Edexcel 9PH0 Paper 2≈ 30 minRevision 12 · updated
On the Edexcel 9PH0 syllabus (First teaching 2015): 1 point this lesson covers
  • 148 Absolute zero

Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.

Section 1 of 14

Learning objectives

  • Describe thermal equilibrium and the direction of energy transfer.
  • Explain how a thermometric property is used to measure temperature.
  • Convert between kelvin and degrees Celsius.
  • Explain absolute zero and why the thermodynamic scale is substance-independent.
Pause and think

A metal bench and a wooden bench sit outside all night. In the morning the metal feels much colder. Are they at different temperatures?

Section 2 of 14

Core idea

Start hereIs 40 °C twice as hot as 20 °C?

No. The Celsius zero is just where water freezes; molecules still move vigorously there. A true scale starts at the point of minimum molecular energy: absolute zero.

The big idea

Heat flows from hot to cold until thermal equilibrium. T/K=θ/∘C+273.15T/\text{K}=\theta/^\circ\text{C}+273.15. Thermometers use properties that vary with temperature.

1. Absolute zero

Pressure of a fixed volume of gas against temperature
−300−200−100100204060801001201401600temperature (°C)pressure (kPa)extrapolates to −273 °C
All gases extrapolate to zero pressure at the same temperature: absolute zero. This defines the Kelvin scale independently of any substance.
  • Absolute zero: minimum internal energy.
  • A change of 1 K equals a change of 1 °C.

2. Thermometers

A thermocouple thermometer
mVice and water: 0 °Cobject being measuredCopperConstantanCold junctionHot junction

Tap a label with a dotted underline to find out what it is.

The e.m.f. depends on the temperature difference between the junctions. Thermocouples are small, respond quickly and have a wide range, but they need calibrating and are not linear.
Describe this diagram in words

Two wires of different metals, copper and constantan, are joined at two junctions. One junction sits in ice and water at 0 °C; the other is in the object being measured. A millivoltmeter in the copper leads measures the small e.m.f. produced.

  • Properties: liquid expansion, resistance, thermocouple e.m.f.
  • Thermocouple: small, fast, wide range.
  • Thermistor: sensitive over a narrow range.
Linear calibration
  1. θ=Xθ−X0X100−X0×100\theta=\frac{X_\theta-X_0}{X_{100}-X_0}\times100
    Fraction of the way from the 0 °C to the 100 °C value of property XX.
  2. assumes X varies linearly\text{assumes }X\text{ varies linearly}
    Different thermometers can disagree between fixed points.
Worked exampleResistance thermometer

100 Ω at 0 °C, 139 Ω at 100 °C; reads 120 Ω.

Goal
Temperature in °C and K.
Strategy
Linear calibration.
  1. θ=120−100139−100×100=51.3∘C\theta=\frac{120-100}{139-100}\times100=51.3^\circ\text{C}
    Fraction 20/39.
  2. T=51.3+273.15=324.4 KT=51.3+273.15=324.4\text{ K}
    Convert.
Answer51.351.3 °C; 324.4324.4 K.
✓ Check120 Ω is just over half way between 100 and 139 ✓.
Common misconceptionRatios in Celsius 20 °C → 40 °C is 293 K → 313 K: only ~7% more mean KE.
Temperature scales
ScaleAbsolute zeroIce meltsWater boils
Kelvin (K)0 K273.15 K373.15 K
Celsius (°C)−273.15 °C0 °C100 °C
A change of 1 K equals a change of 1 °C. T/K = θ/°C + 273.15.
Worked exampleConverting

Convert 27 °C and −196 °C (liquid nitrogen) to kelvin.

Goal
Temperatures in K.
Strategy
Add 273.
  1. 27 + 273 = 300 K.

    Room temperature.
  2. −196 + 273 = 77 K.

    Liquid nitrogen.
Answer300 K and 77 K
✓ CheckBoth positive: nothing is below 0 K ✓.
Quick check

What is meant by thermal equilibrium?

Quick check

What does "equilibrium temperature" mean?

Worked exampleFinding an equilibrium temperature

0.20 kg of water at 80 °C is mixed with 0.30 kg of water at 20 °C. Assuming no energy is lost to the surroundings, find the equilibrium temperature. (c = 4200 J kg⁻¹ K⁻¹)

Goal
The final common temperature θ.
Strategy
Energy lost by the hot water = energy gained by the cold water.
  1. 0.20 × 4200 × (80 − θ) = 0.30 × 4200 × (θ − 20)

    Q = mcΔθ on each side; c cancels.
  2. 16 − 0.20θ = 0.30θ − 6

    Expand both brackets.
  3. 22 = 0.50θ, so θ = 44 °C

    Collect θ terms and solve.
Answer44 °C
✓ CheckIt lies between 20 °C and 80 °C, and nearer 20 °C because there is more cold water ✓.

Summary

  • T=θ+273.15T=\theta+273.15.
  • Calibrate thermometers.
Key words
Thermal equilibrium
No net heat flow.
HistoryKelvin's absolute scale. In 18481848 William Thomson (later Lord Kelvin) proposed a temperature scale based on the efficiency of ideal heat engines, so it couldn't depend on any particular substance. Its zero, absolute zero, lies at −273.15-273.15 °C.
Fun factThe coldest place. Physicists have cooled atoms to below 11 nanokelvin, a billionth of a degree above absolute zero. That's far colder than deep space, which sits at about 2.72.7 K thanks to the cosmic microwave background.
Keep reading for free

Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.