Salam Academy
Materials · Subtopic 4 of 4

Elastic and Plastic Behaviour

Below its elastic limit, a material returns to its original shape when the load is removed; beyond it, it's permanently (plastically) deformed. The work done stretching a material is the area under its force–extension graph, and within the limit of proportionality the stored elastic potential energy is EP=12Fx=12kx2E_P=\tfrac12Fx=\tfrac12kx^2. Ductile materials deform plastically a lot before breaking; brittle ones snap.

9PH0 past papers

Cambridge 9702 Paper 1Cambridge 9702 Paper 2Edexcel YPH11 WPH11AQA 7408 Paper 1Edexcel 9PH0 Paper 2≈ 30 minRevision 7 · updated

Builds on: Stress, strain and the Young modulus

On the Edexcel 9PH0 syllabus (First teaching 2015): 3 points this lesson covers
  • 55 Force-extension graphs
  • 56 Stress-strain graphs
  • 58 Elastic strain energy

Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.

Section 1 of 14

Learning objectives

  • Distinguish elastic and plastic deformation, and define the elastic limit.
  • Distinguish brittle and ductile materials from their graphs.
  • Find work done as the area under a force–extension graph.
  • Use EP=12Fx=12kx2E_P=\tfrac12Fx=\tfrac12kx^2.
Pause and think

Bend a paper clip slightly and it springs back. Bend it a lot and it stays bent. What changed inside the metal?

Section 2 of 14

Core idea

Start hereA catapult stores energy

Pull back a catapult and let go: the stone flies. The stretched rubber stored the work you did. That stored energy is the area under the force–extension graph.

The big idea

Elastic: reversible; plastic: permanent. Stored energy = area under FF–xx; linear: 12Fx=12kx2\frac12Fx=\frac12kx^2.

1. Loading and unloading

Loading and unloading past the elastic limit
246810121020304050600extension (mm)force (N)loadingunloadingpermanent extension 3.9 mm
On unloading, the line is parallel to the original elastic line, but it does not return to zero: the wire has been permanently stretched.
  • Ductile (copper): large plastic region.
  • Brittle (glass): little plastic deformation.
  • Rubber: unloading below loading; area between = energy dissipated (hysteresis).

2. Elastic potential energy

Elastic energy stored in a spring: area under F–x
0.050.10.150.20.25510152025300extension x (m)force (N)½kx²
k=100k=100 N/m. At 0.2 m: E=12(100)(0.04)=2E=\tfrac12(100)(0.04)=2 J. Doubling the extension stores four times the energy.
E=12kx2E=\frac12kx^2
  1. W=area under the F vs x graphW=\text{area under the }F\text{ vs }x\text{ graph}
    Work done stretching.
  2. =12Fx=\tfrac12Fx
    Triangle (linear region).
  3. =12kx2=\tfrac12kx^2
    F=kxF=kx.
Per unit volume: 12σε\frac12\sigma\varepsilon.
Worked exampleSpring k = 100 N m⁻¹

Energy at 0.2 m and 0.4 m.

Goal
Two energies.
Strategy
12kx2\frac12kx^2.
  1. 12(100)(0.04)=2 J\tfrac12(100)(0.04)=2\text{ J}
    0.2 m.
  2. 12(100)(0.16)=8 J\tfrac12(100)(0.16)=8\text{ J}
    0.4 m.
Answer22 J; 88 J.
✓ CheckDouble extension, four times energy ✓.
Worked exampleA catapult

k=400k=400 N m−1^{-1}, pulled 0.15 m, 20 g stone.

Goal
Launch speed (all energy transferred).
Strategy
Elastic PE → KE.
  1. 12(400)(0.152)=4.5 J\tfrac12(400)(0.15^2)=4.5\text{ J}
    Stored.
  2. v=2(4.5)0.020=21 m s−1v=\sqrt{\frac{2(4.5)}{0.020}}=21\text{ m s}^{-1}
    KE.
Answer2121 m s−1^{-1} (upper limit).
✓ CheckReal catapults lose some energy (hysteresis) ✓.
Common misconception12Fx\frac12Fx beyond the limit Non-linear: estimate the area by counting squares.
Material behaviour
TermMeaning
Elastic deformationReturns to original shape when the load is removed
Plastic deformationPermanent change of shape
DuctileCan be drawn into wires (copper)
BrittleBreaks with little or no plastic deformation (glass)
Elastic limitLargest load before permanent deformation
Ultimate tensile stressMaximum stress the material can withstand
Quick check

Why is the area between the loading and unloading curves of rubber important?

Summary

  • Elastic vs plastic.
  • Energy = area; 12kx2\frac12kx^2 when linear.
Key words
Hysteresis
Energy lost when loading and unloading curves differ.
HistoryThe Liberty ships. During the Second World War, some welded Liberty cargo ships cracked in half in cold Atlantic water. Their steel became brittle at low temperatures. The investigation founded the science of fracture mechanics, and ship steel is now tested at low temperatures.
Fun factGorilla Glass bends a little. Phone screens use chemically strengthened glass: ions in the surface are swapped for bigger ones, squeezing the surface into compression. Cracks find it harder to open, so the glass survives drops that would shatter ordinary window glass.
Keep reading for free

Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.