Salam Academy
Mechanics · Subtopic 6 of 7

Work, Power and Efficiency

Work is done when a force moves its point of application: W=Fscos⁡θW=Fs\cos\theta, the force times the displacement in its direction. It's the area under a force–displacement graph, and W=pΔVW=p\Delta V for a gas expanding at constant pressure. Power is the rate of doing work: P=WtP=\dfrac Wt, and for a force moving at steady speed, P=FvP=Fv. Efficiency compares useful output with total input.

9PH0 past papers

Cambridge 9702 Paper 1Cambridge 9702 Paper 2Edexcel YPH11 WPH11AQA 7408 Paper 1Edexcel 9PH0 Paper 1≈ 35 minRevision 9 · updated

Builds on: Newton's laws and momentum, Scalars and vectors

On the Edexcel 9PH0 syllabus (First teaching 2015): 3 points this lesson covers
  • 25 Work done
  • 29 Power
  • 30 Efficiency

Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.

Section 1 of 14

Learning objectives

  • Calculate work done using W=Fscos⁡θW=Fs\cos\theta and as an area under a graph.
  • Calculate work done by an expanding gas, W=pΔVW=p\Delta V.
  • Use P=WtP=\dfrac Wt and derive and use P=FvP=Fv.
  • Calculate efficiency, and apply conservation of energy.
Pause and think

You carry a heavy bag along a flat corridor at steady speed. Your arms ache. How much work do you do on the bag?

Section 2 of 14

Core idea

Start hereWhy cars have a top speed

Floor the accelerator and a car speeds up, but less and less, until it can go no faster. The engine's power is fixed; at higher speeds the same power gives a smaller driving force (P=FvP=Fv), until it only just matches air resistance.

The big idea

W=Fscos⁡θW=Fs\cos\theta = area under FF–ss. P=Wt=FvP=\frac Wt=Fv. Efficiency = useful ÷ total.

1. Work

Work done by a force at an angle to the motion
FF cos θθdisplacement s
Only the component of force along the displacement does work: W = Fs cos θ. The vertical component F sin θ does no work because the box does not move up.
Describe this diagram in words

A box on the floor is pulled by a rope with force F at angle θ above the horizontal. A dashed arrow shows the horizontal component F cos θ. A second, dashed outline of the box further along shows it after moving a displacement s.

Work done by a varying force is the area under the F–x graph
0.020.040.060.080.10.12102030400displacement x (m)force F (N)F = kx (spring)W = ½Fx = 2 J
Stretching a spring 0.1 m to a final force of 40 N: work =12×40×0.1=2=\tfrac12\times40\times0.1=2 J (the triangle's area).
W=Fscos⁡θW=Fs\cos\theta
where
θ\theta
angle between force and displacement.
varying FF
area under the force–displacement graph.
Edge caseNo work A force perpendicular to motion (θ=90∘\theta=90^\circ) does no work, e.g. the normal force on a sliding box.

2. Power

Driving force P/v against resistance for a 60 kW car
1020304050100020003000400050006000700080000speed (m/s)force (N)driving forceresistancetop speed 30 m/s
At low speed there is spare force to accelerate; it runs out at 30 m/s.
P=FvP=Fv
  1. P=ΔWΔt=FΔsΔtP=\frac{\Delta W}{\Delta t}=\frac{F\Delta s}{\Delta t}
    Constant force.
  2. =Fv=Fv
    ΔsΔt=v\frac{\Delta s}{\Delta t}=v.
Worked exampleA 60 kW car (1200 kg)

Top speed 30 m s−1^{-1}.

Goal
Resistance; acceleration at 20 m s−1^{-1} (same resistance).
Strategy
P=FvP=Fv.
  1. F=6000030=2000 NF=\frac{60000}{30}=2000\text{ N}
    At top speed, driving force = resistance.
  2. F=6000020=3000 NF=\frac{60000}{20}=3000\text{ N}
    Driving force at 20 m s−1^{-1}.
  3. a=3000−20001200=0.83 m s−2a=\frac{3000-2000}{1200}=0.83\text{ m s}^{-2}
    F=maF=ma.
Answer20002000 N; 0.830.83 m s−2^{-2}.
✓ CheckAcceleration falls to 0 as v→30v\to30 ✓.
Worked exampleMotor efficiency

Lifts 80 kg by 15 m in 30 s; input 600 W.

Goal
Efficiency.
Strategy
Useful power = mgh/tmgh/t.
  1. 80×9.81×1530=392 W\frac{80\times9.81\times15}{30}=392\text{ W}
    Useful.
  2. 392600=65%\frac{392}{600}=65\%
    Efficiency.
Answer65%65\%.
✓ CheckBelow 100% ✓.
Work, energy and power
QuantityEquationUnit
Work doneW=Fscos⁡θW=Fs\cos\thetaJ
PowerP=WtP=\frac{W}{t}, and P=FvP=FvW
Efficiencyuseful output ÷ total inputno unit (or %)
Worked examplePower of a car

A car travels at a constant 25 m s⁻¹ against a total resistive force of 800 N. What useful power does the engine deliver?

Goal
Power.
Strategy
At constant speed driving force = resistive force; use P = Fv.
  1. Driving force = 800 N.

    Forces balanced.
  2. P = 800 × 25.

    P = Fv.
Answer20 kW
✓ CheckTypical for a car cruising ✓.
Quick check

Why does a person do no work holding a heavy box still, even though they get tired?

Summary

  • W=Fscos⁡θW=Fs\cos\theta; area.
  • P=FvP=Fv; efficiency.
Key words
Power
Rate of energy transfer.

Also on your syllabus

  • Scalars and vectors: work, energy and power are scalars; force and displacement are vectors, so work done uses the component of force along the displacement, W=Fscos⁡θW=Fs\cos\theta.
HistoryWatt's horsepower. James Watt needed to sell his steam engines to mine owners who used horses, so in the 17801780s he measured how fast a horse could lift loads. His "horsepower" (≈746\approx746 W) became a unit of power, and the SI unit, the watt, was later named after him.
Fun factYour brain runs on 20 W. Your brain uses about 2020 W, about a fifth of your resting energy use, less than an old filament light bulb. A supercomputer trying to match a brain's activity needs millions of watts.
Keep reading for free

Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.