Salam Academy
Mechanics · Subtopic 3 of 7

Scalars and Vectors

Scalars have magnitude only; vectors have magnitude and direction. Vectors add tip-to-tail; for two at right angles use Pythagoras and trigonometry, and for other angles use a scale drawing or the cosine rule. Any vector can be resolved into two perpendicular components: Fcos⁡θF\cos\theta along the reference direction and Fsin⁡θF\sin\theta perpendicular to it.

9PH0 past papers

Cambridge 9702 Paper 1Cambridge 9702 Paper 2Edexcel YPH11 WPH11AQA 7408 Paper 1Edexcel 9PH0 Paper 1≈ 30 minRevision 9 · updated

Builds on: SI units, prefixes and estimates

On the Edexcel 9PH0 syllabus (First teaching 2015): 3 points this lesson covers
  • 12 Scalars and vectors
  • 13 Resolving vectors
  • 14 Resultant of coplanar vectors

Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.

Section 1 of 14

Learning objectives

  • Classify quantities as scalars or vectors.
  • Add and subtract coplanar vectors by drawing or calculation.
  • Resolve a vector into two perpendicular components.
  • Resolve forces on an inclined plane.
Pause and think

You walk 33 km east and then 44 km north. How far have you walked, and how far are you from where you started?

Section 2 of 14

Core idea

Start hereRowing across a river

Row straight across a river and you'll land downstream: your velocity and the current's combine. Splitting every vector into perpendicular components turns such problems into simple addition.

The big idea

Vectors add tip-to-tail. Resolve: Fcos⁡θF\cos\theta and Fsin⁡θF\sin\theta. Add components; recombine with Pythagoras and tan⁡\tan.

1. Components

Resolving the weight of a block on a slope
WRF (friction)W sin θW cos θθ
Resolve along and perpendicular to the slope. If the block is at rest, R = W cos θ and F = W sin θ. The angle between W and the into-slope component is also θ.
Describe this diagram in words

A block rests on a slope at angle θ to the horizontal. Its weight W acts straight down. Dashed arrows split W into W sin θ down the slope and W cos θ into the slope. The normal reaction R acts perpendicular to the slope and friction F acts up the slope.

Components of a 10 N force
5102468100horizontalverticalFF cos θF sin θθ
The two components together have exactly the same effect as the original force.
Fx=Fcos⁡θ,Fy=Fsin⁡θ,∣F∣=Fx2+Fy2,tan⁡θ=FyFxF_x=F\cos\theta,\quad F_y=F\sin\theta,\quad|F|=\sqrt{F_x^2+F_y^2},\quad\tan\theta=\frac{F_y}{F_x}
where
θ\theta
angle from the xx-direction.
Worked exampleCrossing a river

Boat 3.0 m s−1^{-1} across; current 2.0 m s−1^{-1}; river 60 m wide.

Goal
Resultant velocity; crossing time.
Strategy
Perpendicular components.
  1. 32+22=3.6 m s−1\sqrt{3^2+2^2}=3.6\text{ m s}^{-1}
    Pythagoras.
  2. tan⁡−123=33.7∘\tan^{-1}\tfrac23=33.7^\circ
    Downstream of straight across.
  3. t=603.0=20 st=\frac{60}{3.0}=20\text{ s}
    Only the across component crosses the river.
Answer3.63.6 m s−1^{-1} at 33.7∘33.7^\circ; 2020 s.
✓ CheckDrift 2×20=402\times20=40 m downstream; 40/60=tan⁡33.7∘40/60=\tan33.7^\circ ✓.

2. Non-perpendicular vectors

Non-perpendicular vectors: use a scale drawing or the cosine rule
2468101234506 N4 N at 60°R ≈ 8.7 N60°
R2=62+42−2(6)(4)cos⁡120∘=76R^2=6^2+4^2-2(6)(4)\cos120^\circ=76, so R=8.72R=8.72 N. Or resolve both and add components.
Worked example6 N and 4 N at 60°

Resultant.

Goal
Size and direction.
Strategy
Take xx along the 6 N force.
  1. Rx=6+4cos⁡60∘=8R_x=6+4\cos60^\circ=8
    Add xx-components.
  2. Ry=4sin⁡60∘=3.46R_y=4\sin60^\circ=3.46
    Add yy-components.
  3. 64+12=8.72 N at 23.4∘\sqrt{64+12}=8.72\text{ N at }23.4^\circ
    Recombine.
Answer8.728.72 N at 23.4∘23.4^\circ to the 6 N force.
✓ CheckCosine rule: 36+16+2(24)(0.5)=7636+16+2(24)(0.5)=76 ✓.
Common misconceptionAdding magnitudes 6+4=106+4=10 only if the forces are parallel.
Pause and think

20 N at 30° above horizontal: components?

Resolve a vector step by step
  1. Sketch

    Draw the vector and the two perpendicular directions you want (usually horizontal and vertical, or along and across a slope).

  2. Adjacent component

    The component next to the angle θ is Fcos⁡θF\cos\theta.

  3. Opposite component

    The component opposite the angle is Fsin⁡θF\sin\theta.

  4. Combine

    Add components in each direction; the resultant is Fx2+Fy2\sqrt{F_x^2+F_y^2} at tan⁡−1(Fy/Fx)\tan^{-1}(F_y/F_x).

Quick check

A 50 N force acts at 30° above the horizontal. What are its components?

Summary

  • Resolve, add, recombine.
Key words
Resultant
Single equivalent vector.

Also on your syllabus

  • Scalars and vectors: a scalar has size only (mass, speed, distance, energy, time); a vector has size and direction (displacement, velocity, acceleration, force, momentum).
HistoryStevin's wreath of spheres. Around 15861586, Simon Stevin imagined a loop of linked balls draped over a triangular wedge. Since it doesn't spin by itself forever, the forces along each slope must balance. From this he deduced how forces resolve along inclines: an early version of vector components.
Fun factPlanes fly sideways. In a strong crosswind, a landing plane points partly into the wind (a "crab angle") so that its resultant velocity lines up with the runway. Moments before touchdown, the pilot straightens the nose.
Keep reading for free

Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.