Salam Academy
Magnetism and electromagnetism · Subtopic 3 of 4

Electromagnetic Induction and Generators

Move a wire across a magnetic field, or change the field through a coil, and an e.m.f. is induced. It's bigger with faster movement, a stronger magnet and more turns, and it reverses if the motion reverses. A generator spins a coil in a magnetic field to produce alternating current, whose trace you can read on an oscilloscope.

8463 past papers

Cambridge 5054 Paper 1Cambridge 5054 Paper 2Cambridge 0625 Papers 2, 4Cambridge 0625 Papers 1, 3Edexcel 4PH1 Paper 1PEdexcel 4PH1 Paper 2P≈ 30 minRevision 12 · updated

Builds on: Magnetism and magnetic fields

On the AQA 8463 syllabus (First teaching 2016): 3 points this lesson covers
  • 4.7.3.1 Induced potential
  • 4.7.3.2 Alternators and dynamos
  • 4.7.3.3 Microphones

Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.

Section 1 of 14

Learning objectives

  • Describe how to induce an e.m.f. with a magnet and a coil or wire.
  • State the factors that affect the size and direction of the induced e.m.f.
  • Describe the a.c. generator and sketch its output.
  • Read p.d. and time period from an oscilloscope trace.
Pause and think

Push a magnet into a coil connected to a meter, and the needle flicks. Hold the magnet still inside the coil. What does the needle do now?

Section 2 of 14

Core idea

Start hereElectricity from a moving magnet

Push a magnet into a coil of wire connected to a meter: the needle flicks. Stop: nothing. Pull it out: the needle flicks the other way. It's not the magnet that makes electricity, it's the change.

The big idea

A changing magnetic field through a coil induces an e.m.f. Faster change → bigger e.m.f. The induced current opposes the change (Lenz). Generators use this.

1. Inducing a current

Pushing a magnet into a coil induces a current
Nmeter
Moving in: the needle flicks one way. Moving out: the other way. Not moving: no reading, even with the magnet inside.
  • In: current one way; out: the other; still: none.
  • Bigger e.m.f.: faster motion, stronger magnet, more turns.
Why the induced current opposes the change
  1. N pole pushed in⇒coil end becomes N\text{N pole pushed in}\Rightarrow\text{coil end becomes N}
    Repels the magnet: you must do work.
  2. work done→electrical energy\text{work done}\to\text{electrical energy}
    Energy is conserved.
If the coil attracted the magnet, energy would appear from nothing.

2. Generators

Output of an a.c. generator
24681012−2−1120timevoltageone rotation = one cycle
As the coil spins, the voltage rises, falls and reverses: alternating current. Spinning faster gives a bigger and more frequent output.
Worked exampleSpeeding up a generator

Spin twice as fast.

Goal
Effect on output.
Strategy
Faster change; more turns per second.
  1. Field lines are cut twice as fast: larger peak e.m.f.

  2. Twice as many turns per second: double the frequency.

AnswerHigher peak e.m.f. and double frequency.
✓ CheckPeak occurs when the coil plane is parallel to the field ✓.
Common misconceptionStationary magnet No movement means no change, so no e.m.f., however strong the magnet.
Inside a power station

Every turbine-and-generator station turns kinetic energy into electrical energy by electromagnetic induction.

What affects the induced e.m.f.
ChangeEffect on e.m.f.
Move the magnet fasterLarger
More turns on the coilLarger
Stronger magnetLarger
Reverse the motion or the poleReversed direction
Magnet held stillZero
Quick check

State Lenz's law and use it for a magnet pushed into a coil.

Summary

  • Change of field → e.m.f.
  • Opposes the change.
Key words
Electromagnetic induction
Producing an e.m.f. by a changing magnetic field.

Also on your syllabus

TrickFleming's right-hand rule For a generator: thuMb = Motion of the wire, First finger = magnetic Field (N to S), seCond finger = induced Current, all at right angles on the right hand. Use the left hand for motors (force on a current) and the right hand for generators (current from motion).
Key takeawayLenz's law The current produced by an induced e.m.f. always flows so that its magnetic effect opposes the change producing it. Push a N pole into a coil and the coil's near end becomes a N pole, repelling the magnet, so you must do work: energy is conserved.
Key takeawayMicrophones A moving-coil microphone is a loudspeaker in reverse. Sound waves make a diaphragm vibrate; it is joined to a coil in the field of a permanent magnet, so the coil moves back and forth through the field and a changing potential difference is induced. The pressure variations of the sound become variations in current: the generator effect.
  • Demonstrating induction: move a magnet into a coil connected to a sensitive galvanometer: the needle deflects while the magnet moves, in the opposite direction when it is pulled out, and more when it moves faster.
HistoryFaraday's ring. On 2929 August 18311831, Michael Faraday wound two coils on an iron ring. When he switched on the current in one, a galvanometer on the other twitched, then fell back. He had discovered electromagnetic induction, the principle behind every power station.
Fun factYour phone charges by induction. A wireless charging pad has a coil carrying alternating current. Its changing magnetic field passes through a coil in your phone and induces a current that charges the battery, with no metal contacts at all.
Keep reading for free

Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.