In Paper 3 you take real measurements. Record raw readings to the precision of the instrument (a metre rule to 1 mm, a micrometer to 0.01 mm). Repeat readings and average them; the absolute uncertainty is about half the range. Table headings need the quantity and unit, like l/cm. Calculated values get the same number of significant figures as the least precise raw data, or one more.
Record readings to the precision of the instrument.
Use repeat readings to estimate absolute uncertainty.
Calculate percentage uncertainties and combine them.
Set out tables with correct headings and significant figures.
Pause and think
You time 20 swings of a pendulum as 31.4 s instead of timing just one swing. Why is that better?
Your reaction-time uncertainty (about 0.2 s) is the same whether you time 1 swing or 20. Spread over 20 swings, it gives only 0.01 s uncertainty per swing, a much smaller percentage uncertainty in the period.
Section 2 of 14
Core idea
Start hereYour table is your evidence
An examiner can't see you do the experiment. Your table is the only record. Units in the headings, readings to the right precision, and sensible significant figures show you measured carefully.
The big idea
Headings "quantity / unit"; raw data to instrument resolution; repeats averaged; uncertainty ≈ half the range; derived values to matching s.f.
1. Setting out
A well-set-out results table
Headings show quantity and unit separated by a slash. Times for 20 swings are repeated; T is the mean divided by 20, given to one more significant figure than the raw data at most.
Consistent decimal places for raw data.
Derived quantities: same s.f. as raw data, or one more.
Repeat and average; uncertainty = half the range.
Worked exampleTiming 20 swings
32.1 s, 31.8 s, 32.3 s.
Goal
Mean, uncertainty, period.
Strategy
Average; half range; ÷20.
1
332.1+31.8+32.3=32.07 s
Mean.
2
232.3−31.8=0.25 s
Half range.
3
T=2032.07=1.60±0.01 s
Divide both.
AnswerT=1.60±0.01 s.
✓ CheckPercentage uncertainty ~0.8% ✓.
⚠️ Common misconceptionDropping zerosA metre rule reading of 34 cm should be written 34.0 cm.
Quick check
How should you read the volume in a measuring cylinder?
At eye level with the bottom of the meniscus, to avoid parallax error.
Summary
Quantity / unit headings.
Precision matched to instrument.
Key words
Resolution
Smallest change an instrument can show.
📜 HistoryPrecision makes discoveries.Argon was discovered in 1894 because Lord Rayleigh noticed nitrogen from air was 0.5% denser than nitrogen made chemically. Only a careful estimate of his uncertainties convinced him the difference was real, not error. It earned him a Nobel Prize.
🤯 Fun factThickness of a sheet of paper.A ruler can't measure a single sheet of paper (0.1 mm), but measure 500 sheets in a ream (about 5.0 cm) and divide: 0.100 mm with only 2% uncertainty. Measuring many and dividing is one of the oldest tricks in experimental physics.
Keep reading for free
Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.