Resistance and Resistivity
Resistance is . A metal at constant temperature obeys Ohm's law: current is proportional to p.d. A wire's resistance depends on its material, length and area: , where the resistivity is a material property. Filament lamps, diodes, thermistors and LDRs have non-ohmic, changing resistances.
Builds on: Potential difference and power
On the Edexcel 9PH0 syllabus (First teaching 2015): 4 points this lesson covers
- 38 I-V characteristics
- 39 Resistivity
- 40 Measuring resistivity (core practical 2)
- 47 Resistance and temperature
Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.
Learning objectives
- Use and state Ohm's law.
- Use and describe how to measure resistivity.
- Sketch and explain – characteristics of a metal, a filament lamp and a diode.
- Describe how thermistors and LDRs respond to temperature and light.
You stretch a wire to twice its length without changing its volume. What happens to its resistance?
Core idea
House wiring uses copper; toaster elements use nichrome. A wire's resistance depends on its length and thickness, but also on the material itself. Resistivity captures the material part.
; , depends on material and temperature.
1. I–V characteristics
- Metal at constant temperature: ohmic.
- Filament lamp: rises as it heats.
- Diode: conducts forward above ~0.6 V.
2. Resistivity
Tap a label with a dotted underline to find out what it is.
Describe this diagram in words
A resistance wire is fixed along a metre rule. A circuit with a cell, switch and ammeter connects to one end of the wire and to a sliding contact at a distance l along it. A voltmeter measures the potential difference across that length of wire.
- where
- resistivity (Ω m).
- length.
- cross-sectional area.
Ω m, m, mm.
- Goal
- .
- Strategy
- Area from radius.
- Radius 0.20 mm.
- Formula.
Stretched to twice its length, same volume.
- Goal
- New .
- Strategy
- , .
- Volume fixed.
- Simplify.
3. Sensors
- NTC thermistor: falls as temperature rises.
- LDR: falls as light intensity rises.
A wire is stretched to twice its length with the same volume. What happens to its resistance?
Summary
- .
- I–V shapes.
- Resistivity
- Resistance of a 1 m cube of the material.
Also on your syllabus
- Ohm's law: for a metal conductor at constant temperature, the current is directly proportional to the potential difference. Resistance is defined by for any component, ohmic or not.
Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.