Reflection and Refraction of Light
Light reflects so that the angle of incidence equals the angle of reflection, both measured from the normal. When light enters a denser medium it slows down and bends towards the normal: . Going the other way, beyond the critical angle all the light reflects back: total internal reflection, used in optical fibres.
Builds on: General properties of waves
On the AQA 8463 syllabus (First teaching 2016): 2 points this lesson covers
- 4.6.1.3 Reflection of waves (RP9)
- 4.6.2.6 Visible light and colour
Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.
Learning objectives
- Use the law of reflection and describe the image in a plane mirror.
- Describe refraction towards and away from the normal.
- Use and .
- Explain total internal reflection and optical fibres.
A straw in a glass of water looks bent at the surface. Is the straw really bent?
Core idea
Put a straw in a glass of water and it looks broken at the surface. The straw is fine; the light from it changes speed as it leaves the water and bends. That bending, refraction, is how lenses, glasses and optical fibres work.
Reflection: . Refraction: . Total internal reflection beyond the critical angle, .
1. Reflection
- Angles measured from the normal.
- Plane-mirror image: virtual, upright, same size, as far behind as the object is in front.
2. Refraction
- where
- angle in air.
- angle in the material.
- m/s.
- speed in the material.
, .
- Goal
- ; speed in glass.
- Strategy
- Both forms of the formula.
- .
- .
3. Total internal reflection
- At the critical angle, light leaving the glass skims the surface ( in air).
- .
Critical angle; what happens at inside?
- Goal
- ; behaviour.
- Strategy
- .
- Formula.
- Above the critical angle.
Why does a straw look bent?
- Dense to less dense
Light must be travelling from a denser medium (glass) towards a less dense one (air).
- Bending away
It bends away from the normal as it leaves.
- Critical angle
At the critical angle c the refracted ray runs along the surface (angle of refraction 90°): .
- Beyond c
If the angle of incidence is larger than c, all the light is reflected back: total internal reflection.
- Uses
Optical fibres, endoscopes and prisms in binoculars.
The refractive index of glass is 1.5. What is its critical angle?
Summary
- for mirrors.
- .
- TIR beyond .
- Refractive index
- How much light slows in a material.
- Normal
- Line perpendicular to the surface.
Also on your syllabus
- Through a boundary. Light passing from air into glass or water slows down and bends towards the normal. Light passing from glass or water into air speeds up and bends away from the normal. A ray travelling along the normal does not bend.
- Plane-mirror construction. To find an image: draw the object; mark its image the same perpendicular distance behind the mirror; draw two reflected rays from the image (dashed behind the mirror) to the eye; then join each point where they meet the mirror back to the object. Check with a protractor that the angle of incidence equals the angle of reflection at each point.
- Experiment: law of reflection. Draw a line for the mirror and a normal on paper. Shine a narrow beam from a ray box along a line at a measured angle of incidence (or use two pins). Mark the reflected ray with crosses, join them and measure the angle of reflection with a protractor. Repeat for several angles: each time .
- Experiment: total internal reflection. Shine a ray box beam into the curved side of a semicircular glass block, towards the centre of the flat side, so it does not bend on entry. Increase the angle at the flat face: the refracted ray bends further away from the normal until it skims the surface at the critical angle; beyond that, all the light is reflected back inside the block. A right-angled prism shows the same effect.
- Light waves are transverse: they can be reflected, refracted and diffracted.
- Ray diagrams: draw rays as straight ruled lines with arrows, draw the normal (dashed) at 90° to the surface where the ray meets it, and measure angles from the normal. For reflection ; for refraction into glass the ray bends towards the normal.
Reflection and colour
- Specular reflection happens at a smooth surface such as a mirror: parallel rays stay parallel, so you see a clear image.
- Diffuse reflection happens at a rough surface such as paper: each tiny part of the surface faces a different way, so reflected rays scatter in all directions and there is no image.
- Colour of an object: an opaque object looks the colour of the wavelengths it reflects most; it absorbs the rest. A red apple reflects red and absorbs other colours. White objects reflect all wavelengths equally; black objects absorb them all.
- Colour filters transmit (let through) only certain wavelengths and absorb the rest. A green filter lets green light through, so a red object seen through it looks black.
- Practical: refractive index of glass. Shine a ray into a rectangular glass block at several angles of incidence, mark the rays and measure the angles of refraction; plot sin i against sin r: the gradient is the refractive index.
Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.