The Electromagnetic Spectrum
Electromagnetic waves are transverse waves that all travel at m/s in a vacuum. In order of increasing frequency (decreasing wavelength): radio, microwaves, infrared, visible light, ultraviolet, X-rays, gamma rays. Each region has its own uses; the highest frequencies carry the most energy and are the most dangerous.
Builds on: General properties of waves
On the AQA 8463 syllabus (First teaching 2016): 4 points this lesson covers
- 4.6.2.1 Types of electromagnetic waves
- 4.6.2.2 Properties of electromagnetic waves
- 4.6.2.3 Production and hazards of EM waves
- 4.6.2.4 Uses of EM waves
Summarised in our own words from the official syllabus. Check the exact wording in the board's specification.
Learning objectives
- List the regions of the spectrum in order of frequency and wavelength.
- State the properties shared by all electromagnetic waves.
- Use with m/s.
- Describe uses and hazards of each region.
Radio waves, light and X-rays seem completely different. One goes through walls, one lets you see, one shows your bones. What do they have in common?
Core idea
The radio in a car and the X-ray at a hospital seem unrelated, yet both are electromagnetic waves travelling at the speed of light. Only the wavelength differs, and that changes everything about what they can do.
EM waves: transverse, m/s in vacuum. Long to short : radio, microwave, infrared, visible, UV, X-ray, gamma. Shorter : higher , more energy.
1. The family
- where
- m/s for all EM waves in vacuum.
Radio m; green light m.
- Goal
- Frequencies.
- Strategy
- .
- Radio: 100 MHz.
- Green light.
2. Uses and dangers
- Radio: broadcasting. Microwave: cooking, satellites.
- Infrared: remote controls, thermal imaging.
- Ultraviolet: sterilising, fluorescence; sunburn.
- X-rays: imaging bones; ionising.
- Gamma: treating cancer, sterilising; ionising.
Why are UV, X-rays and gamma most dangerous?
| Region | Typical wavelength | Use | Danger |
|---|---|---|---|
| Radio | 1 m – 1 km | Broadcasting, communication | Very low |
| Microwaves | 1 mm – 30 cm | Cooking, satellites, mobile phones | Internal heating of tissue |
| Infrared | 1 μm – 1 mm | Remote controls, thermal imaging, heating | Skin burns |
| Visible | 400–700 nm | Seeing, optical fibres | Eye damage if intense |
| Ultraviolet | 10–400 nm | Sterilising, security marking | Skin cancer, eye damage |
| X-rays | 0.01–10 nm | Medical imaging, security scanners | Ionising: cell mutation |
| Gamma rays | < 0.01 nm | Cancer treatment, sterilising | Ionising: cell mutation |
Why are X-rays and gamma rays more dangerous than radio waves?
Summary
- Order and properties.
- .
- Ionising
- Able to knock electrons from atoms.
Also on your syllabus
Communication with electromagnetic waves
- Microwaves: mobile phones, wireless (Wi-Fi) networks and communication with satellites, because they pass through walls and the atmosphere and can carry a lot of data.
- Radio waves: Bluetooth (short range between devices), radio and television broadcasting. Long-wavelength radio waves diffract round hills and buildings.
- Visible light and infrared: optical fibres carry cable television and high-speed broadband by total internal reflection.
Analogue and digital signals
- An analogue signal varies continuously and can take any value, like the changing pressure of a sound wave.
- A digital signal has only a few set values, usually two: on and off (1 and 0).
- Sound can be sent either way: a microphone gives an analogue signal, which can be sampled and converted into a stream of 1s and 0s.
- Why digital is better. Every signal picks up noise and weakens over long distances. A digital signal can be regenerated exactly, because the receiver only has to decide "1 or 0", so the noise is removed; amplifying an analogue signal amplifies the noise as well. Digital signals can also be sent at a higher rate, carrying more data each second.
Why does a digital TV picture either look perfect or freeze, while old analogue TV got gradually more "snowy" as the signal weakened?
Create a free account to read the rest of this lesson: key formulae, worked examples, explore the graph, common mistakes, exam tip, guided practice and more. Your answers are checked and your progress is saved.